W11384469 Whirlpool Door Switch

100% Guaranteed genuine parts logo
This Refrigerator Door Switch is a simple mechanism that helps turn the light in your appliance on and off. If the door of your appliance is open the light should be on, and if the door is closed the light should be off. Your appliance door is opened and closed frequently, meaning the mechanism may wear out over time. It is not uncommon that this part will need to be replaced. You may need a putty knife to release the mounting tab and remove the faulty rocker switch. To install the new one, simply attach the wires and snap it into place in the liner of your refrigerator or freezer. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Switch
• Tools Needed: Putty knife

Weight : 0.031300 lbs
Dimension : 2.322800 x 1.220400 x 1.535400
Special Price $11.93 Regular Price $13.25 10% off
In stock
This Refrigerator Door Switch is a simple mechanism that helps turn the light in your appliance on and off. If the door of your appliance is open the light should be on, and if the door is closed the light should be off. Your appliance door is opened and closed frequently, meaning the mechanism may wear out over time. It is not uncommon that this part will need to be replaced. You may need a putty knife to release the mounting tab and remove the faulty rocker switch. To install the new one, simply attach the wires and snap it into place in the liner of your refrigerator or freezer. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Switch
• Tools Needed: Putty knife

Weight : 0.031300 lbs
Dimension : 2.322800 x 1.220400 x 1.535400
Write Your Own Review
You're reviewing:W11384469 Whirpool Refrigerator Door Switch
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. C3680308
  2. C3680310
  3. 61003026
  4. 66987-1
  5. 1118894
  6. 4344314
  7. C3680301
  8. C3680304
  9. C3680307
  10. R0213159
  11. R0950145
  12. 0054153
  13. 0056157
  14. 0086495
  15. 0311292
DIY Guide to Replacing Whirlpool W11384469 SWITCH

Replacing a faulty switch in your Whirlpool appliance is an easy fix with the right tools and know-how. This guide will walk you through the steps to replace the Whirlpool W11384469 switch.

Tools Needed:
• Phillips head screwdriver
• Needle nose pliers
• Wire Strippers
• Flathead Screwdriver
• New switch W11384469 (optional)

Step 1: Unplug the appliance from its power source. Before attempting any repairs, make sure to unplug the appliance from the wall outlet to avoid any potential hazards.

Step 2: Remove the old switch. With the help of a Phillips head screwdriver, remove the mounting screws that hold the switch in place. Disconnect the wires from the switch and use needle nose pliers to remove the insulation that surrounds the wiring.

Step 3: Install the new switch. Use the wire strippers to strip the insulation off the end of each of the appliance’s wires. Secure the replacement switch in place using the mounting screws. Connect the wiring to the appropriate terminals on the switch and use the flathead screwdriver to tighten the screws.

Step 4: Test the switch. Carefully plug the appliance back into its power source and flip the switch to make sure it’s working properly. If the switch does not turn on, turn off the power, double check the wiring connections, and try again.

Congratulations! You have successfully replaced the Whirlpool W11384469 switch.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool