5304409888 Frigidaire Oven Terminal Block Assembly with Hardware

DIY Instructions: How to Replace the Frigidaire 5304409888 P-1 Terminal Block with Hardware

Tools Needed:
• Phillips Head Screwdriver
• Flathead Screwdriver
• Voltage Tester
• Pliers
• 6-32 Terminal Screws

Step 1: Unscrew the existing Frigidaire 5304409888 P-1 terminal block. To do this, turn the small metal screw provided at the top of the Frigidaire unit counterclockwise. Use a Phillips head screwdriver if needed.

Step 2: Use a voltage tester to make sure that there is no power running through the wiring.

Step 3: Pull the old terminal block away from the wiring. Make sure to be careful and not break any wires.

Step 4: Cut off the old terminal block and discard.

Step 5: Take the new 6-32 Terminal Screws and attach them to the wiring. Make sure to use a flathead screwdriver to securely fasten each wire.

Step 6: Attach the new Frigidaire 5304409888 P-1 terminal block to the wiring. Secure it with the small metal screw provided.

Step 7: Run a voltage test and make sure all connections are secure and functioning correctly.

You have now successfully replaced the Frigidaire 5304409888 P-1 Terminal Block with hardware!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.