WPW10190929 Whirlpool Refrigerator Ice Maker Mold

DIY Instructions for Replacing a Whirlpool WPW10190929 MOLD-ICE MAKER

If your Whirlpool WPW10190929 MOLD-ICE MAKER is not performing efficiently, then it may be time to replace it. Replacing a broken ice maker is a relatively easy DIY project that can usually be completed within an hour or two. Here are some simple steps to help you get the job done quickly and easily.

1. Gather the required tools and materials. Depending on the type of ice maker you have, you will need a few basic tools such as a screwdriver, pliers, wrench, and possibly a drill. You will also need to buy a new ice maker to replace the old one.

2. Unplug the refrigerator to make sure that you are working in a safe environment.

3. Remove the screws that secure the old ice maker to the mount. In most cases, this requires the use of a screwdriver. Once you have unscrewed all of the screws, the old ice maker should come loose from the mount.

4. Carefully remove the wires from the terminals on the old ice maker. Some models may have a grounding wire, so it is important to carefully loosen this before disconnecting the wires.

5. Place the new ice maker into the mount and secure it with the screws you removed earlier. Make sure that the new ice maker is securely attached before proceeding.

6. Reconnect the wires to the terminals of the new ice maker and make sure that they are tightly secured.

7. Turn the refrigerator back on and wait for the ice maker to begin making ice. With the new ice maker, you should notice improved efficiency right away.

Following these steps will ensure that your Whirlpool WPW10190929 MOLD-ICE MAKER replacement goes smoothly. If you have any questions or concerns while replacing the ice maker, it is best to contact a professional for assistance.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.