WP2169142 Whirlpool Fan Blade
The SxS Refrigerator Fan Motor Blade circulates air through the evaporator fins and interior compartment of the refrigerator to improve the cooling efficiency. If a blade has cracked or broken, replacing this part may alleviate the issue. To access this part, you'll have to remove the ice bucket, shelving, bins, rails and mounting clips to remove the back panel from the freezer. Installing this part will require basic hand tools, some disassembly of the freezer and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Fan Motor Blade
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Fan Motor Blade
• Tools Needed: Multi screwdriver
Weight : 0.1724 lbs
Dimension : 4.685 x 4.3307 x 1.1811
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SxS Refrigerator Fan Motor Blade circulates air through the evaporator fins and interior compartment of the refrigerator to improve the cooling efficiency. If a blade has cracked or broken, replacing this part may alleviate the issue. To access this part, you'll have to remove the ice bucket, shelving, bins, rails and mounting clips to remove the back panel from the freezer. Installing this part will require basic hand tools, some disassembly of the freezer and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Fan Motor Blade
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Fan Motor Blade
• Tools Needed: Multi screwdriver
Weight : 0.1724 lbs
Dimension : 4.685 x 4.3307 x 1.1811
Write Your Own Review
The following parts are replaced by this product
- 2169142
- 12217201
- 8170544
DIY Replacing the Whirlpool WP2169142 BLADE-FAN
Replacing your Whirlpool WP2169142 BLADE-FAN is an easy job that can be completed in a few simple steps. Here are the steps you need to follow to successfully replace your Whirlpool WP2169142 BLADE-FAN:
1. Unplug the appliance from the wall or turn off the circuit breaker providing power to the appliance. This will ensure safety while performing the repair.
2. Locate the fan blade on the appliance. It should be located on the top or side of the appliance, depending on the model.
3. Carefully remove the blades from the appliance as they are very fragile. This can be done by unscrewing the screws that hold the blades in place.
4. Once the screws are removed, you can use a flathead screwdriver to gently pry the blades from the appliance.
5. Take the new Whirlpool WP2169142 BLADE-FAN and line it up with the old blades. Make sure it is lined up correctly before inserting it into the appliance.
6. Place the new fan blades into the appliance and secure them with the screws that were used to remove the old blades.
7. Plug the appliance back in or turn the circuit breaker back on to provide power to the appliance.
8. Test the new blades by turning on the appliance to make sure they are spinning properly.
Your Whirlpool WP2169142 BLADE-FAN has now been successfully replaced. Enjoy the updated look and increased efficiency of your appliance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your Whirlpool WP2169142 BLADE-FAN is an easy job that can be completed in a few simple steps. Here are the steps you need to follow to successfully replace your Whirlpool WP2169142 BLADE-FAN:
1. Unplug the appliance from the wall or turn off the circuit breaker providing power to the appliance. This will ensure safety while performing the repair.
2. Locate the fan blade on the appliance. It should be located on the top or side of the appliance, depending on the model.
3. Carefully remove the blades from the appliance as they are very fragile. This can be done by unscrewing the screws that hold the blades in place.
4. Once the screws are removed, you can use a flathead screwdriver to gently pry the blades from the appliance.
5. Take the new Whirlpool WP2169142 BLADE-FAN and line it up with the old blades. Make sure it is lined up correctly before inserting it into the appliance.
6. Place the new fan blades into the appliance and secure them with the screws that were used to remove the old blades.
7. Plug the appliance back in or turn the circuit breaker back on to provide power to the appliance.
8. Test the new blades by turning on the appliance to make sure they are spinning properly.
Your Whirlpool WP2169142 BLADE-FAN has now been successfully replaced. Enjoy the updated look and increased efficiency of your appliance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
