4388736 Whirlpool Refrigerator Ice Dispenser Bucket Bin Conveyor Auger Drum
The Refrigerator Ice Dispenser Drum catches the ice and sends it to the crusher assembly. If the hole of the dispenser drum has rounded out, it may not be pushing the ice through the door and replacing this part may alleviate the issue. This kit includes the instructions, (1) flat washer, and the drum. Installing this part will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Dispenser Drum
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Dispenser Drum
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.662100 lbs
Dimension : 5.826700 x 5.078700 x 3.110200
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Refrigerator Ice Dispenser Drum catches the ice and sends it to the crusher assembly. If the hole of the dispenser drum has rounded out, it may not be pushing the ice through the door and replacing this part may alleviate the issue. This kit includes the instructions, (1) flat washer, and the drum. Installing this part will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Dispenser Drum
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Ice Dispenser Drum
• Tools Needed: Multi screwdriver, putty knife
Weight : 0.662100 lbs
Dimension : 5.826700 x 5.078700 x 3.110200
Write Your Own Review
The following parts are replaced by this product
- 4388496
- 946192
- 946193
- 2171681
- 2196194
- 1118470
1. To replace the 4388736 Whirlpool Refrigerator Ice Dispenser Bucket Bin Conveyor Auger Drum, begin by unplugging your refrigerator from the power source.
2. Next, locate the access panel to the ice dispenser auger inside the refrigerator.
3. Open the access panel and gently pull out the old auger drum.
4. Take the new auger drum and carefully feed it into the opening while ensuring that the teeth on the auger mesh properly with those on the motor shaft.
5. Connect the new auger drum to the ice maker’s motor shaft using the included screws.
6. Replace the access panel and tighten the screws to secure it back in place.
7. Plug the refrigerator back into the power source and test the new auger drum for proper operation.
8. Finally, clean up any debris and dispose of the old auger drum according to local regulations.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Next, locate the access panel to the ice dispenser auger inside the refrigerator.
3. Open the access panel and gently pull out the old auger drum.
4. Take the new auger drum and carefully feed it into the opening while ensuring that the teeth on the auger mesh properly with those on the motor shaft.
5. Connect the new auger drum to the ice maker’s motor shaft using the included screws.
6. Replace the access panel and tighten the screws to secure it back in place.
7. Plug the refrigerator back into the power source and test the new auger drum for proper operation.
8. Finally, clean up any debris and dispose of the old auger drum according to local regulations.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible brands information is not available for this part.