WP3387230 Whirlpool Screw
This Appliance Screw is a replacement part for many different appliances, including ranges, refrigerators and dryers. Each screw is sold separately. This is a universal item that can be used across several brands; check to see if your model number is compatible. Installing this part will require basic hand tools and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Appliance Screw
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Appliance Screw
• Tools Needed: Multi screwdriver
Weight : 0.0072 lbs
Dimension : 0.87 x 0.37 x 0.37
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Appliance Screw is a replacement part for many different appliances, including ranges, refrigerators and dryers. Each screw is sold separately. This is a universal item that can be used across several brands; check to see if your model number is compatible. Installing this part will require basic hand tools and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Appliance Screw
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Appliance Screw
• Tools Needed: Multi screwdriver
Weight : 0.0072 lbs
Dimension : 0.87 x 0.37 x 0.37
Write Your Own Review
The following parts are replaced by this product
- 7101P274-60
- 74002483
- 1986238
- 1986251
- 560994
- 7101P080-60
- 3387230
- 8170956
- 67002935
Replacing the Whirlpool WP3387230 Screw:
DIY Instructions
1. Unplug the appliance and make sure that it is off and not connected to a power source.
2. Locate the screw that you need to replace. It should be located near where you plugged the appliance in.
3. Use a screwdriver to loosen the screw and carefully remove it from the appliance. Make sure to keep this screw in a safe place so you can use it later.
4. Take the new screw and line it up with the hole where the old screw was located.
5. Using your screwdriver, slowly tighten the new screw into place. Make sure to not over-tighten the screw as this could cause damage to the appliance.
6. Once the new screw is in place and tightened, plug the appliance back in and turn it on. Test the connection to make sure that it is properly secured.
7. If all is well, then your Whirlpool WP3387230 screw has been replaced successfully.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Unplug the appliance and make sure that it is off and not connected to a power source.
2. Locate the screw that you need to replace. It should be located near where you plugged the appliance in.
3. Use a screwdriver to loosen the screw and carefully remove it from the appliance. Make sure to keep this screw in a safe place so you can use it later.
4. Take the new screw and line it up with the hole where the old screw was located.
5. Using your screwdriver, slowly tighten the new screw into place. Make sure to not over-tighten the screw as this could cause damage to the appliance.
6. Once the new screw is in place and tightened, plug the appliance back in and turn it on. Test the connection to make sure that it is properly secured.
7. If all is well, then your Whirlpool WP3387230 screw has been replaced successfully.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
