330031 Whirlpool Range Surface Element Receptacle Kit
This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches your receptacle), (2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating properly or works intermittently, replacing this part may alleviate these issues. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Receptacle and Wire Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Receptacle and Wire Kit
• Tools Needed: Multi screwdriver
Weight : 0.163700 lbs
Dimension : 5.826700 x 2.834600 x 1.377900
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches your receptacle), (2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating properly or works intermittently, replacing this part may alleviate these issues. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Receptacle and Wire Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Element Receptacle and Wire Kit
• Tools Needed: Multi screwdriver
Weight : 0.163700 lbs
Dimension : 5.826700 x 2.834600 x 1.377900
Write Your Own Review
1. First, unplug your Whirlpool Range from the electrical outlet and shut off the electricity to the circuit breaker.
2. Locate the element receptacle for the range that needs replacing.
3. Carefully remove the two screws holding the element in place, and then gently remove the element from the range.
4. Disconnect the two wires from the old receptacle, taking note of which wire is connected to which terminal.
5. Take your new 330031 Whirlpool Range Surface Element Receptacle kit and carefully attach the two wires to their respective terminals.
6. Place the new receptacle into the range and secure it with the two screws that were removed previously.
7. Reconnect your Whirlpool Range to the outlet and turn the electricity back on at the circuit breaker.
8. Turn on the range and test the new element receptacle to ensure proper function.
Congratulations! You have successfully replaced the 330031 Whirlpool Range Surface Element Receptacle Kit. Your range should now be up and running.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Locate the element receptacle for the range that needs replacing.
3. Carefully remove the two screws holding the element in place, and then gently remove the element from the range.
4. Disconnect the two wires from the old receptacle, taking note of which wire is connected to which terminal.
5. Take your new 330031 Whirlpool Range Surface Element Receptacle kit and carefully attach the two wires to their respective terminals.
6. Place the new receptacle into the range and secure it with the two screws that were removed previously.
7. Reconnect your Whirlpool Range to the outlet and turn the electricity back on at the circuit breaker.
8. Turn on the range and test the new element receptacle to ensure proper function.
Congratulations! You have successfully replaced the 330031 Whirlpool Range Surface Element Receptacle Kit. Your range should now be up and running.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
