WP2195916K Whirlpool Endcap

100% Guaranteed genuine parts logo
Part #: WPL WP2195916K
100% Guaranteed genuine parts logo
Whirlpool Jenn-Air KitchenAid Maytag Roper Admiral Sears Kenmore Norge Magic Chef Amana Refrigerator Trim Shelf Retainer Bar End Cap 2195916K

We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Special Price $5.53 Regular Price $6.14 10% off
In stock
Whirlpool Jenn-Air KitchenAid Maytag Roper Admiral Sears Kenmore Norge Magic Chef Amana Refrigerator Trim Shelf Retainer Bar End Cap 2195916K

We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 2195916
  2. 2156002
  3. 2195916K
Replacing the WP2195916K Whirlpool End Cap

Replacing a Whirlpool end cap can be a relatively simple repair job with the right tools and knowledge. This tutorial will walk you through the steps needed to safely and properly replace the WP2195916K Whirlpool end cap.

Tools Needed:
#1 Phillips head screwdriver, flashlight

Instructions:
1. Unplug the appliance from the electrical source before attempting any repairs.
2. Carefully inspect the end cap for any damage or excessive wear. If there is any significant damage to the cap, it should be replaced with a new one.
3. Remove the screws on the exterior of the end cap, using a #1 Phillips head screwdriver.
4. Pull the end cap away from the washer to access the interior.
5. Look inside the end cap to identify the old part. Make sure to check all around the edges where the part number may be located.
6. Disconnect the electrical and water connections from the old part, making sure to note which connections correspond to each.
7. Pull the old part out and discard.
8. Install the new end cap in the reverse order as above, making sure to securely connect the electrical and water connections.
9. Insert the new end cap screws into the exterior of the end cap and securely fasten.
10. Plug the appliance back into the electrical source and test for proper operation.

Your Whirlpool end cap should now be replaced. It is important to follow the steps above carefully and to use the appropriate tools to ensure a successful repair. Properly maintaining your appliance will ensure years of reliable service.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool