everydrop® Filter 3 EDR3RXD1 Whirlpool Refrigerator Water
• This EDR3RXD1 Water Filter (Teal) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water.
• Tested and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42.
• Engineered to provide water that is not only clean but also has a fresh and pure taste.
• Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option.
• Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator.
• Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper.
• For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction.
Weight : 0.000000 lbs
Dimension : 2.500000 x 2.500000 x 13.500000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
• This EDR3RXD1 Water Filter (Teal) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water.
• Tested and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42.
• Engineered to provide water that is not only clean but also has a fresh and pure taste.
• Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option.
• Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator.
• Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper.
• For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction.
Weight : 0.000000 lbs
Dimension : 2.500000 x 2.500000 x 13.500000
Write Your Own Review
The following parts are replaced by this product
- 9020B
- 4396710
- 4396711
- 4396841
- 4396842
- 9030B
- 9030
- 4396841B
- 2313412
DIY Instructions for Replacing the EDR3RXD1 Whirlpool Refrigerator Ice and Water Filter 3
1. Turn off the water supply to your refrigerator by turning off the valve located behind the fridge.
2. Unscrew the plastic cap from the filter housing, located at the top of your refrigerator. You may need to use some force to unscrew it.
3. Pull out the old filter by grasping it at its sides and pulling it straight out.
4. Take the new filter and make sure it has a snug fit in the filter housing. It should not require any additional force to install.
5. Once the new filter is installed, you can turn the water supply back on by turning the valve behind the refrigerator.
6. Replace the plastic cap and ensure that it’s tightly secured to the filter housing.
7. Reset the “filter change†reminder feature on your refrigerator to let you know when it’s time to replace the filter again.
8. Locate the reset button on your refrigerator and follow the manufacturer’s instructions for resetting the filter life reminder.
9. Flush the system for five minutes before using the ice or water dispenser.
10. Enjoy the improved quality of your refrigerated water with the new filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the water supply to your refrigerator by turning off the valve located behind the fridge.
2. Unscrew the plastic cap from the filter housing, located at the top of your refrigerator. You may need to use some force to unscrew it.
3. Pull out the old filter by grasping it at its sides and pulling it straight out.
4. Take the new filter and make sure it has a snug fit in the filter housing. It should not require any additional force to install.
5. Once the new filter is installed, you can turn the water supply back on by turning the valve behind the refrigerator.
6. Replace the plastic cap and ensure that it’s tightly secured to the filter housing.
7. Reset the “filter change†reminder feature on your refrigerator to let you know when it’s time to replace the filter again.
8. Locate the reset button on your refrigerator and follow the manufacturer’s instructions for resetting the filter life reminder.
9. Flush the system for five minutes before using the ice or water dispenser.
10. Enjoy the improved quality of your refrigerated water with the new filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
