ICE MAKER
Part #: WPL D7824706Q
Ice maker assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Ice maker assembly works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of fridges.
Write Your Own Review
Step by Step DIY Instructions on Replacing the D7824706Q Whirlpool Refrigerator Ice Maker Assembly
1. Unplug your refrigerator power cord from the electrical outlet or turn off the circuit breaker.
2. Remove the ice bucket. Locate the shut off arm on the side of the D7824706Q ice maker assembly, and push it up to the "Off" position.
3. Disconnect the electrical connector plug from the rear wall of the freezer compartment, then remove the three mounting screws that secure the ice maker assembly.
4. Carefully pull the ice maker assembly out of the freezer compartment.
5. Install the new ice maker assembly in the same way that you removed the old one. Teach the new ice maker assembly how to make cubes by pushing the shut off arm down into the "On" position.
6. Reattach the electrical connector plug to the back wall of the freezer. Secure the ice maker assembly with the new screws you removed in step 3.
7. Place the ice bucket back underneath the ice dispenser.
8. Turn on the power to your refrigerator and test the new ice maker assembly to make sure it's producing ice correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your refrigerator power cord from the electrical outlet or turn off the circuit breaker.
2. Remove the ice bucket. Locate the shut off arm on the side of the D7824706Q ice maker assembly, and push it up to the "Off" position.
3. Disconnect the electrical connector plug from the rear wall of the freezer compartment, then remove the three mounting screws that secure the ice maker assembly.
4. Carefully pull the ice maker assembly out of the freezer compartment.
5. Install the new ice maker assembly in the same way that you removed the old one. Teach the new ice maker assembly how to make cubes by pushing the shut off arm down into the "On" position.
6. Reattach the electrical connector plug to the back wall of the freezer. Secure the ice maker assembly with the new screws you removed in step 3.
7. Place the ice bucket back underneath the ice dispenser.
8. Turn on the power to your refrigerator and test the new ice maker assembly to make sure it's producing ice correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
