279311 Whirpool Gas Dryer Igniter Kit

100% Guaranteed genuine parts logo
The Gas Dryer Igniter Kit is a flat-style igniter assembly that can be used to replace both a round or flat igniter in your appliance. This kit includes (1) ignitor assembly, (1) bracket, (2) wire nuts and (1) mounting screw. If the dryer does not heat or heats intermittently, replacing this part may alleviate these issues. Note that this igniter is fragile and you cannot touch the grey section of the part; only handle the igniter by its white plastic covering. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: While the dryer is disassembled, consider replacing the gas valve coils (item 279834) as well.

Part Specification
•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
•  This product is a replacement part
•  Package contains (1) Gas Dryer Igniter Kit
•  Tools Needed: Multi screwdriver and wrench
Special Price $13.02 Regular Price $14.47 10% off
In stock
The Gas Dryer Igniter Kit is a flat-style igniter assembly that can be used to replace both a round or flat igniter in your appliance. This kit includes (1) ignitor assembly, (1) bracket, (2) wire nuts and (1) mounting screw. If the dryer does not heat or heats intermittently, replacing this part may alleviate these issues. Note that this igniter is fragile and you cannot touch the grey section of the part; only handle the igniter by its white plastic covering. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: While the dryer is disassembled, consider replacing the gas valve coils (item 279834) as well.

Part Specification
•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
•  This product is a replacement part
•  Package contains (1) Gas Dryer Igniter Kit
•  Tools Needed: Multi screwdriver and wrench
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. DE351
  2. DE354
  3. 239233
  4. 239300
  5. 239302
  6. 279185
  7. 338899
  8. 338900
  9. 3389895
  10. 340607
  11. 343128
  12. 660991
  13. 685211
  14. 686590
  15. 686833
How to Replace a Whirlpool Dryer Flat Ignitor with Bracket (Part 279311)

1. Unplug the dryer power cord from the wall outlet to disconnect power and turn off the gas supply to the dryer.

2. Open the dryer cabinet and locate the ignitor.

3. Remove the bracket screws to separate the ignitor from the bracket and slide the ignitor out of its socket.

4. Place the new ignitor in position and reattach the bracket to the ignitor using the screws.

5. Reconnect the gas supply to the dryer and plug the power cord back into the wall outlet.

6. Test the dryer to confirm it is operating correctly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool