WP8066018 Whirlpool Spring
This Dishwasher Detergent Lid Spring holds the lid to the detergent securely so it can open and close properly. If your dishwasher isn't dispensing detergent, or if the spring is damaged, it may need to be replaced. The part is located on the inside right of the dishwasher door. Separate the lid from the pin with a flat blade screwdriver, pull out the pin and remove the old spring. Replacing this part will require basic hand tools, but no disassembly of the dishwasher or repair experience. Recommended Item: Also consider replacing the Detergent Dispenser Cover (item 4387043). Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10501250) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Detergent Lid Spring
• Tools Needed: Multi screwdriver, torque 20 screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Detergent Lid Spring
• Tools Needed: Multi screwdriver, torque 20 screwdriver
Weight : 0.0072 lbs
Dimension : 0.75 x 0.25 x 0.25
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dishwasher Detergent Lid Spring holds the lid to the detergent securely so it can open and close properly. If your dishwasher isn't dispensing detergent, or if the spring is damaged, it may need to be replaced. The part is located on the inside right of the dishwasher door. Separate the lid from the pin with a flat blade screwdriver, pull out the pin and remove the old spring. Replacing this part will require basic hand tools, but no disassembly of the dishwasher or repair experience. Recommended Item: Also consider replacing the Detergent Dispenser Cover (item 4387043). Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10501250) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Detergent Lid Spring
• Tools Needed: Multi screwdriver, torque 20 screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Detergent Lid Spring
• Tools Needed: Multi screwdriver, torque 20 screwdriver
Weight : 0.0072 lbs
Dimension : 0.75 x 0.25 x 0.25
Write Your Own Review
The following parts are replaced by this product
- 300106
- 8066018
- 300106D
Replacing the Whirlpool WP8066018 Spring
Step 1: Unplug the appliance from the wall outlet to make sure no power is going to it.
Step 2: Remove the existing spring. For this, pry open the back panel of the appliance using a flathead screwdriver. This will give you access to the spring and other components that need to be removed.
Step 3: Find the replacement spring. It should be available at your local hardware store or online. Make sure you get the correct one for your model.
Step 4: Install the new spring. This can be done by carefully unscrewing the old spring and replacing it with the new one. Be sure to keep all screws and bolts in the same place as before.
Step 5: Plug the appliance back into the wall outlet and test it out to make sure the spring works properly.
Step 6: Once everything is working correctly, replace the back panel of the appliance to complete the replacement.
Following these steps will help you replace the Whirlpool WP8066018 Spring quickly and safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Unplug the appliance from the wall outlet to make sure no power is going to it.
Step 2: Remove the existing spring. For this, pry open the back panel of the appliance using a flathead screwdriver. This will give you access to the spring and other components that need to be removed.
Step 3: Find the replacement spring. It should be available at your local hardware store or online. Make sure you get the correct one for your model.
Step 4: Install the new spring. This can be done by carefully unscrewing the old spring and replacing it with the new one. Be sure to keep all screws and bolts in the same place as before.
Step 5: Plug the appliance back into the wall outlet and test it out to make sure the spring works properly.
Step 6: Once everything is working correctly, replace the back panel of the appliance to complete the replacement.
Following these steps will help you replace the Whirlpool WP8066018 Spring quickly and safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
