279834 Whirlpool Dryer Gas Valve Solenoid Coil Kit
This Dryer Gas Valve Ignition Solenoid Kit is a newer style that fits all dryers with a two-coil gas valve. If your dryer does not heat or only heats intermittently, replacing this part may alleviate these issues. To test the coil functionality, watch the burner and if the igniter glows for awhile and then shuts off without the gas igniting. When removing the larger coil, make sure not to lose the spacer inside of it. The new coil does not include this spacer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Dryer Valve Ignition Solenoid Kit
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Dryer Valve Ignition Solenoid Kit
• Tools Needed: Multi screwdriver, putty knife
Weight : 1.510800 lbs
Dimension : 5.500000 x 5.250000 x 6.500000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Dryer Gas Valve Ignition Solenoid Kit is a newer style that fits all dryers with a two-coil gas valve. If your dryer does not heat or only heats intermittently, replacing this part may alleviate these issues. To test the coil functionality, watch the burner and if the igniter glows for awhile and then shuts off without the gas igniting. When removing the larger coil, make sure not to lose the spacer inside of it. The new coil does not include this spacer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Dryer Valve Ignition Solenoid Kit
• Tools Needed: Multi screwdriver, putty knife
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Gas Dryer Valve Ignition Solenoid Kit
• Tools Needed: Multi screwdriver, putty knife
Weight : 1.510800 lbs
Dimension : 5.500000 x 5.250000 x 6.500000
Write Your Own Review
The following parts are replaced by this product
- 58804A
- 58804B
- 12001349
- 694539
- 694540
- 306105
- 306106
- 63-6614
- 63-6615
- 306106
- 306105
- 279834BULK
DIY Instructions for Replacing the 279834 Whirlpool Dryer Gas Valve Solenoid Coil Kit, 2PK
1. Unplug your dryer from its power source and turn off the gas supply lines.
2. Remove the front access panel of your dryer with a screwdriver.
3. Locate your existing gas valve solenoid coils, which can be found in the upper left side of the interior of your dryer.
4. Disconnect the leads and terminals from the existing gas valve solenoid coil.
5. Remove the existing gas valve solenoid coils from your dryer by unscrewing two screws that are connected to the gas valve assembly.
6. Obtain the replacement part: 279834 Whirlpool Dryer Gas Valve Solenoid Coil Kit, 2PK.
7. Install the new gas valve solenoid coils by connecting the leads and terminals first, and then mounting them to the dryer with the two screws.
8. Replace the front access panel to the dryer and securely tighten the screws.
9. Turn on the gas supply lines and plug the dryer back into its power source.
10. Test the dryer to ensure that the replacement part is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your dryer from its power source and turn off the gas supply lines.
2. Remove the front access panel of your dryer with a screwdriver.
3. Locate your existing gas valve solenoid coils, which can be found in the upper left side of the interior of your dryer.
4. Disconnect the leads and terminals from the existing gas valve solenoid coil.
5. Remove the existing gas valve solenoid coils from your dryer by unscrewing two screws that are connected to the gas valve assembly.
6. Obtain the replacement part: 279834 Whirlpool Dryer Gas Valve Solenoid Coil Kit, 2PK.
7. Install the new gas valve solenoid coils by connecting the leads and terminals first, and then mounting them to the dryer with the two screws.
8. Replace the front access panel to the dryer and securely tighten the screws.
9. Turn on the gas supply lines and plug the dryer back into its power source.
10. Test the dryer to ensure that the replacement part is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
