819342 Whirlpool Refrigerator Endcap Kit
This Refrigerator Door Handle End Cap Kit is chrome and includes both the upper and lower door handle caps for freezers and fresh food compartment handles. If your door does not close or open properly, this kit may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Handle End Cap Kit, Chrome
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Handle End Cap Kit, Chrome
• No tools required for installation
Weight : 0.1825 lbs
Dimension : 4.45 x 3.43 x 1.65
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Refrigerator Door Handle End Cap Kit is chrome and includes both the upper and lower door handle caps for freezers and fresh food compartment handles. If your door does not close or open properly, this kit may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Handle End Cap Kit, Chrome
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Door Handle End Cap Kit, Chrome
• No tools required for installation
Weight : 0.1825 lbs
Dimension : 4.45 x 3.43 x 1.65
Write Your Own Review
Step 1: Gather the Tools and Supplies Needed
- 819342 Whirlpool Refrigerator Door Handle End Cap Kit, Chrome
- Screwdriver
- Phillips-head screwdriver
- Needle nose pliers
- Cloth
Step 2: Disassembly of the Door Handle
- Remove the screws from the handle using the Phillips-head screwdriver.
- Carefully remove the handle from the refrigerator door by gently pulling with your hands.
- Disconnect any wiring connected to the handle.
Step 3: Replace the End Cap
- Using the cloth, clean the area around the handle where the end cap will be installed.
- Place the end cap into the recess in the refrigerator door.
- Secure the end cap using the screws that were removed in step two.
Step 4: Installation of the Door Handle
- Reconnect any wiring connected to the handle.
- Position the handle onto the refrigerator door, making sure the screws fit into the pre-drilled holes.
- Secure the handle with the screws and a screwdriver.
Step 5: Testing and Cleanup
- Make sure the handle is securely attached to the refrigerator door.
- If necessary, adjust the handle to ensure it operates properly.
- Clean up any debris or dirt that may have been created during the process.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
- 819342 Whirlpool Refrigerator Door Handle End Cap Kit, Chrome
- Screwdriver
- Phillips-head screwdriver
- Needle nose pliers
- Cloth
Step 2: Disassembly of the Door Handle
- Remove the screws from the handle using the Phillips-head screwdriver.
- Carefully remove the handle from the refrigerator door by gently pulling with your hands.
- Disconnect any wiring connected to the handle.
Step 3: Replace the End Cap
- Using the cloth, clean the area around the handle where the end cap will be installed.
- Place the end cap into the recess in the refrigerator door.
- Secure the end cap using the screws that were removed in step two.
Step 4: Installation of the Door Handle
- Reconnect any wiring connected to the handle.
- Position the handle onto the refrigerator door, making sure the screws fit into the pre-drilled holes.
- Secure the handle with the screws and a screwdriver.
Step 5: Testing and Cleanup
- Make sure the handle is securely attached to the refrigerator door.
- If necessary, adjust the handle to ensure it operates properly.
- Clean up any debris or dirt that may have been created during the process.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
