20290 Speed Queen WASHER,19/32IDX1.031ODX1/8

1. Shut off the water supply to the washer and disconnect the hoses from the valves.

2. Unscrew the mounting bolts that secure the washer to the sink or counter top.

3. Lift the old washer out of place and remove it from the area.

4. Clean any debris left behind and make sure the area is prepped for the new washer.

5. Place the new washer in the opening, making sure it is properly centered and aligned.

6. Secure the washer to the sink or countertop with the mounting bolts.

7. Connect the cold water supply hose to the valve on the new washer and tighten the connection with adjustable pliers.

8. Repeat this process for the hot water supply hose.

9. Turn on the water supply and check for leaks at the connections.

10. Test the new washer to make sure it is working properly before using.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.