WP3149404 Whirlpool Oven Surface Element Switch
The Electric Range Surface Burner Control Switch operates the small surface element, turning it off and on and regulating the heat intensity. If your element remains at high heat or doesn’t turn on at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Weight : 0.0529 lbs
Dimension : 1.8503 x 1.7716 x 2.244
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Electric Range Surface Burner Control Switch operates the small surface element, turning it off and on and regulating the heat intensity. If your element remains at high heat or doesn’t turn on at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Weight : 0.0529 lbs
Dimension : 1.8503 x 1.7716 x 2.244
Write Your Own Review
The following parts are replaced by this product
- 3149404
- 310179
- 311847
- 311856
- 311857
- 314144
- 3148951
DIY Home Maintenance: Replacing the Whirlpool WP3149404 Switch
Replacing a faulty switch is a relatively easy home maintenance task that can be done without the help of an electrician or professional. The following instructions will guide you through replacing the Whirlpool WP3149404 switch in your home.
1. First, locate the switch and turn off the power to it. To ensure that you don’t get shocked or suffer any other damage, make sure that the power is off before you start working on the switch.
2. Once the power has been turned off, remove the screws holding the switch in place. This may require a flathead screwdriver.
3. Pull the old switch out from the wall box. Make sure to note how the wiring was connected to the old switch before removing it.
4. Connect the black wires to the two outer brass coloured screws on the new switch and the white wires to the two inner silver coloured screws. Tighten the screws securely.
5. Put the switch into the wall box, lining up the mounting holes, and secure it with the screws.
6. Turn the power back on and test the switch to make sure it is working properly.
You have now successfully replaced the Whirlpool WP3149404 switch in your home. If you experience any difficulty during this process, make sure the power is turned off before seeking the help of a qualified electrician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a faulty switch is a relatively easy home maintenance task that can be done without the help of an electrician or professional. The following instructions will guide you through replacing the Whirlpool WP3149404 switch in your home.
1. First, locate the switch and turn off the power to it. To ensure that you don’t get shocked or suffer any other damage, make sure that the power is off before you start working on the switch.
2. Once the power has been turned off, remove the screws holding the switch in place. This may require a flathead screwdriver.
3. Pull the old switch out from the wall box. Make sure to note how the wiring was connected to the old switch before removing it.
4. Connect the black wires to the two outer brass coloured screws on the new switch and the white wires to the two inner silver coloured screws. Tighten the screws securely.
5. Put the switch into the wall box, lining up the mounting holes, and secure it with the screws.
6. Turn the power back on and test the switch to make sure it is working properly.
You have now successfully replaced the Whirlpool WP3149404 switch in your home. If you experience any difficulty during this process, make sure the power is turned off before seeking the help of a qualified electrician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
