WP8577274 Whirlpool Dryer Thermistor
The Whirlpool Dryer Thermistor is located on the blower housing next to the thermal fuse. If your appliance's drying cycle is too long or too short, or if your appliance is displaying a fault code, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermistor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermistor
• Tools Needed: Multi screwdriver
Weight : 0.0311 lbs
Dimension : 2.3228 x 1.6929 x 1.1023
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Whirlpool Dryer Thermistor is located on the blower housing next to the thermal fuse. If your appliance's drying cycle is too long or too short, or if your appliance is displaying a fault code, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermistor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Thermistor
• Tools Needed: Multi screwdriver
Weight : 0.0311 lbs
Dimension : 2.3228 x 1.6929 x 1.1023
Write Your Own Review
The following parts are replaced by this product
- 3976615
- 3390292
- 3406294
- 772546
- 8577274
Replacing the Whirlpool WP8577274 THERMISTOR
Tools Needed: Phillips head screwdriver, new thermostat
Instructions:
1. Unplug your dryer from the wall before you begin to replace the thermostat.
2. Use a Phillips head screwdriver to remove the screws on the back of the dryer panel and then remove the panel.
3. Locate the thermostat on the side of the dryer where all of the wires are connected.
4. Disconnect the wires from the thermostat and then unscrew the screws that attach it to the dryer.
5. Take the new thermostat and attach it to the same spot on the side of the dryer.
6. Connect the wires to the new thermostat as they were on the old one and then screw it in securely.
7. Put the dryer panel back on and screw it in place with the Phillips head screwdriver.
8. Plug the dryer back in to the wall and turn it on to test the replacement thermostat.
By following these steps, you should have successfully replaced the Whirlpool WP8577274 THERMISTOR in your dryer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed: Phillips head screwdriver, new thermostat
Instructions:
1. Unplug your dryer from the wall before you begin to replace the thermostat.
2. Use a Phillips head screwdriver to remove the screws on the back of the dryer panel and then remove the panel.
3. Locate the thermostat on the side of the dryer where all of the wires are connected.
4. Disconnect the wires from the thermostat and then unscrew the screws that attach it to the dryer.
5. Take the new thermostat and attach it to the same spot on the side of the dryer.
6. Connect the wires to the new thermostat as they were on the old one and then screw it in securely.
7. Put the dryer panel back on and screw it in place with the Phillips head screwdriver.
8. Plug the dryer back in to the wall and turn it on to test the replacement thermostat.
By following these steps, you should have successfully replaced the Whirlpool WP8577274 THERMISTOR in your dryer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
