WP312535 Whirlpool Washer

DIY Guide to Replacing a Whirlpool WP312535 Washer Timer

Replacing the timer on your Whirlpool WP312535 washer can seem daunting, but you can actually do it yourself with the right steps. With this step-by-step guide, you’ll have your washer’s timer replaced in no time!

Step 1: Unplug your washer and turn off the water supply.

Step 2: Detach the control panel from the washer.

Step 3: Locate the timer. It will be behind the control panel and can be easily identified.

Step 4: Carefully remove the screws holding the timer in place.

Step 5: Disconnect any wiring connected to the timer.

Step 6: Install the new timer into place, connecting all necessary wires and screws.

Step 7: Reinstall the control panel on the washer.

Step 8: Turn on the water supply and plug the washer back in.

Step 9: Test the new timer to make sure it is functioning properly.

And there you have it! You have successfully replaced your Whirlpool WP312535 washer timer. With some patience and this simple guide, you can save yourself time and money by doing it yourself.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.