34318 Speed Queen Washer / Dryer Rubber Foot Pad

DIY Instructions for Replacing Speed Queen Washer / Dryer Rubber Foot Pad (34318)

Tools Needed:

- Phillips head screwdriver

- Flathead screwdriver

- New rubber foot pad (34318)

Instructions:

1. Unplug the washer / dryer from the power source and move away from the wall.

2. Using a Philips head screwdriver, remove the two screws located at the bottom of the back of the machine.

3. Using a flathead screwdriver, carefully remove the existing rubber foot pad from the base of the washer / dryer.

4. Insert the new rubber foot pad (34318) into place, gently pushing down until it securely fits the base.

5. Using the Phillips head screwdriver, screw the two screws back in place at the bottom of the back of the machine.

6. Test the new rubber foot pad to ensure a secure fit and that it is stable.

7. Move the washer / dryer back into its original position - making sure to plug it back into the power source.

You have successfully replaced the rubber foot pad (34318) on your Speed Queen Washer / Dryer!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.