WP2218113 Whirlpool Dairy Door

DIY Guide to Replacing the WP2218113 Whirlpool Refrigerator Dairy Compartment Door

This guide will provide you with step-by-step instructions on how to replace the WP2218113 Whirlpool refrigerator dairy compartment door. By following these simple steps, you can quickly and easily complete the job.

Tools Needed:
• Philips screwdriver
• Small flathead screwdriver
• Replacement WP2218113 Whirlpool refrigerator dairy compartment door

Instructions:

1. Unplug the refrigerator from the electrical outlet and move it away from the wall.

2. Open the freezer door and locate the lower hinge cover.

3. Use the small flathead screwdriver to pry off the cover and then loosen the screws that hold the hinge in place.

4. Once the screws have been loosened, lift up the bottom of the refrigerator door and slide the hinge out of the grooves in the refrigerator body.

5. Slide the new replacement WP2218113 Whirlpool refrigerator dairy compartment door onto the hinge and secure the screws.

6. Place the hinge back into the grooves and secure the hinge cover.

7. Plug the fridge back into the electrical outlet and move it back into place.

8. Open the refrigerator door and verify that the dairy compartment door is properly seated and secure.

Congratulations! You have now successfully completed the task of replacing the WP2218113 Whirlpool refrigerator dairy compartment door.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.