800548 Speed Queen Screw Torx Door Handle 8-16 Front Load Washer

Replacing a SCREW,SS #8X1/2 TORX PLASTITE

1. Gather the necessary tools and supplies: screwdriver, replacement SCREW,SS #8X1/2 TORX PLASTITE, gloves, goggles or protective eyewear, and a dust mask if working in a dusty area.

2. Wear the appropriate safety items such as gloves, goggles, and a dust mask when replacing a SCREW,SS #8X1/2 TORX PLASTITE.

3. Disconnect the power to the object that needs the SCREW,SS #8X1/2 TORX PLASTITE replaced.

4. Carefully remove the existing SCREW,SS #8X1/2 TORX PLASTITE by unscrewing it with a suitable screwdriver.

5. Place the new SCREW,SS #8X1/2 TORX PLASTITE into position, securing it with the same screwdriver.

6. Check the new SCREW,SS #8X1/2 TORX PLASTITE is tight and secure.

7. Reconnect the power to the object that had the SCREW,SS #8X1/2 TORX PLASTITE replaced.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.