WP3385089 Whirlpool Track
The Dishwasher Dishrack Slide Rail, Left supports the upper dishrack as it slides in and out from dishwasher. Replacing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this item. Also be sure to turn off the water supply to your dishwasher before you begin. Recommended Item: Dishwasher Dishrack Slide Rail, Right (item W11259786). We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Slide Rail, Left
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Slide Rail, Left
• Tools Needed: Multi screwdriver
Weight : 0.3638 lbs
Dimension : 19.0157 x 2.0472 x 1.2992
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dishwasher Dishrack Slide Rail, Left supports the upper dishrack as it slides in and out from dishwasher. Replacing this part will require no disassembly or repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this item. Also be sure to turn off the water supply to your dishwasher before you begin. Recommended Item: Dishwasher Dishrack Slide Rail, Right (item W11259786). We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Slide Rail, Left
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Dishrack Slide Rail, Left
• Tools Needed: Multi screwdriver
Weight : 0.3638 lbs
Dimension : 19.0157 x 2.0472 x 1.2992
Write Your Own Review
The following parts are replaced by this product
- 3385089
Replacing the Whirlpool WP3385089 TRACK
1. Before you start replacing the Whirlpool WP3385089 track, make sure that you have completely shut off the power to your range. It is important to unplug the range before you begin the replacement.
2. Remove all of the screws from the rear panel of the range, typically located near the bottom of the appliance. After all of the screws are out, carefully lift the rear panel away from the range.
3. Disconnect the wires connected to the back of the range leading to the control panel. Once the wires are disconnected, take off the two nuts that secure the old track in place.
4. Carefully remove the old track and set it aside. Now you can place your new Whirlpool WP3385089 track in place and reattach the screws and nuts that you had taken off before.
5. Connect the wires that you had disconnected from the rear panel. Secure the back panel back on the range with the screws that were removed before.
6. Plug the power cord back into the wall outlet and turn the power back on. Your new Whirlpool WP3385089 track is now ready for use.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Before you start replacing the Whirlpool WP3385089 track, make sure that you have completely shut off the power to your range. It is important to unplug the range before you begin the replacement.
2. Remove all of the screws from the rear panel of the range, typically located near the bottom of the appliance. After all of the screws are out, carefully lift the rear panel away from the range.
3. Disconnect the wires connected to the back of the range leading to the control panel. Once the wires are disconnected, take off the two nuts that secure the old track in place.
4. Carefully remove the old track and set it aside. Now you can place your new Whirlpool WP3385089 track in place and reattach the screws and nuts that you had taken off before.
5. Connect the wires that you had disconnected from the rear panel. Secure the back panel back on the range with the screws that were removed before.
6. Plug the power cord back into the wall outlet and turn the power back on. Your new Whirlpool WP3385089 track is now ready for use.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
