12001676 Whirlpool Range Surface Burner Receptacle Kit

The Whirlpool Range Surface Burner Receptacle Kit (12001676) is a durable, reliable replacement part perfect for quickly and easily fixing any damaged receptacles in your range. This kit contains two durable plastic receptacle blocks and two 6-inch wires with three terminals each, allowing you to replace the blocks quickly and efficiently. Additionally, this kit comes with a protective film to guard against wear, oxidation, and corrosion. The included instructions are easy to understand and the installation process only requires basic tools. With the Whirlpool Range Surface Burner Receptacle Kit, you can restore your range to its original condition so you can get back to cooking in no time! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Whirlpool Range Surface Burner Receptacle Kit (12001676) is a durable, reliable replacement part perfect for quickly and easily fixing any damaged receptacles in your range. This kit contains two durable plastic receptacle blocks and two 6-inch wires with three terminals each, allowing you to replace the blocks quickly and efficiently. Additionally, this kit comes with a protective film to guard against wear, oxidation, and corrosion. The included instructions are easy to understand and the installation process only requires basic tools. With the Whirlpool Range Surface Burner Receptacle Kit, you can restore your range to its original condition so you can get back to cooking in no time! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Replacing a Whirlpool Range Surface Burner Receptacle Kit: DIY Instructions
1. Gather the necessary materials. You will need the replacement kit, which is the 12001676 Whirlpool Range Surface Burner Receptacle Kit, as well as a Phillips screwdriver and needle-nose pliers.
2. Unplug the range from the wall outlet and shut off the power to the range at your circuit breaker.
3. Locate the existing receptacle kit. This should be located underneath the burner on the range or behind the control panel of the range.
4. Once you have located the existing kit, unscrew it using the Phillips screwdriver. Disconnect the wires and remove the existing kit.
5. Take the new 12001676 Whirlpool Range Surface Burner Receptacle Kit and connect the wires. Make sure they are properly connected and secure them with the needle-nose pliers.
6. Place the new receptacle in place and use the Phillips screwdriver to screw it in securely.
7. Turn the power back on at your circuit breaker and plug the range back into the wall.
8. Test the new kit by turning the burner knob to the "on" position and seeing if the burner ignites. If the burner does not ignite, then check the connections and try again.
9. Once the burner successfully ignites, you have successfully replaced the Whirlpool Range Surface Burner Receptacle Kit!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather the necessary materials. You will need the replacement kit, which is the 12001676 Whirlpool Range Surface Burner Receptacle Kit, as well as a Phillips screwdriver and needle-nose pliers.
2. Unplug the range from the wall outlet and shut off the power to the range at your circuit breaker.
3. Locate the existing receptacle kit. This should be located underneath the burner on the range or behind the control panel of the range.
4. Once you have located the existing kit, unscrew it using the Phillips screwdriver. Disconnect the wires and remove the existing kit.
5. Take the new 12001676 Whirlpool Range Surface Burner Receptacle Kit and connect the wires. Make sure they are properly connected and secure them with the needle-nose pliers.
6. Place the new receptacle in place and use the Phillips screwdriver to screw it in securely.
7. Turn the power back on at your circuit breaker and plug the range back into the wall.
8. Test the new kit by turning the burner knob to the "on" position and seeing if the burner ignites. If the burner does not ignite, then check the connections and try again.
9. Once the burner successfully ignites, you have successfully replaced the Whirlpool Range Surface Burner Receptacle Kit!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.


