W10124096 Whirlpool Refrigerator Condenser Fan Motor Kit with Blade
This SxS Refrigerator Condenser Fan Motor is located at the back of your refrigerator and moves air across the condenser coil to cool the appliance. If your refrigerator isn’t cooling properly, replacing this part may alleviate the issue. This kit includes (1) motor assembly, (1) fan blade, (1) wire harness and installation instructions. Note that this item features an updated design and may differ in appearance from the original part; if your appliance has a large round motor, use the included wire harness adapter to install the new motor. Helpful Tip: Attach the fan to the new motor before installing. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Condenser Fan Motor
• Tools Needed: Multi screwdriver, extra-long blade screwdriver and small 1/4" socket wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Condenser Fan Motor
• Tools Needed: Multi screwdriver, extra-long blade screwdriver and small 1/4" socket wrench
Weight : 1.747300 lbs
Dimension : 8.110200 x 5.472400 x 5.472400
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This SxS Refrigerator Condenser Fan Motor is located at the back of your refrigerator and moves air across the condenser coil to cool the appliance. If your refrigerator isn’t cooling properly, replacing this part may alleviate the issue. This kit includes (1) motor assembly, (1) fan blade, (1) wire harness and installation instructions. Note that this item features an updated design and may differ in appearance from the original part; if your appliance has a large round motor, use the included wire harness adapter to install the new motor. Helpful Tip: Attach the fan to the new motor before installing. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Condenser Fan Motor
• Tools Needed: Multi screwdriver, extra-long blade screwdriver and small 1/4" socket wrench
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Condenser Fan Motor
• Tools Needed: Multi screwdriver, extra-long blade screwdriver and small 1/4" socket wrench
Weight : 1.747300 lbs
Dimension : 8.110200 x 5.472400 x 5.472400
Write Your Own Review
The following parts are replaced by this product
- 2206005
- 2315558
- W10204250
- W10509333
- W10861645
- SM4096
DIY Instructions for Replacing the Whirlpool Refrigerator Condenser Motor with Fan Blade
1. Start by unplugging your refrigerator from the wall outlet and disconnecting any water lines attached to the refrigerator if present.
2.Lay the refrigerator down so you can access the back of the appliance.
3.Remove the screws that hold the back panel in place and gently pull the panel away from the refrigerator.
4.Locate the condenser motor and fan blade and gently remove the fan blade from the condenser motor by unscrewing the retaining bolts.
5.Get the replacement fan blade and affix it to the condenser motor using the same retaining bolts. Make sure the fan blade is secured and fits properly on the motor.
6.Reattach the back panel on the refrigerator and reattach any water lines if they existed.
7.Turn the refrigerator back upright and plug it in to the wall outlet.
8.Turn on the refrigerator and test for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Start by unplugging your refrigerator from the wall outlet and disconnecting any water lines attached to the refrigerator if present.
2.Lay the refrigerator down so you can access the back of the appliance.
3.Remove the screws that hold the back panel in place and gently pull the panel away from the refrigerator.
4.Locate the condenser motor and fan blade and gently remove the fan blade from the condenser motor by unscrewing the retaining bolts.
5.Get the replacement fan blade and affix it to the condenser motor using the same retaining bolts. Make sure the fan blade is secured and fits properly on the motor.
6.Reattach the back panel on the refrigerator and reattach any water lines if they existed.
7.Turn the refrigerator back upright and plug it in to the wall outlet.
8.Turn on the refrigerator and test for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
