33489 Speed Queen Washer Dryer Beaded StandPipe Strap

Step 1: Unplug the Speed Queen 33489 Washer from the power source and make sure that all water lines are properly disconnected.

Step 2: Remove the top panel of the washer by unscrewing the screws and gently lifting the panel off.

Step 3: Locate the Strap, Standpipe-Beaded and gently pull it off the washer's interior with a pair of pliers or a small flathead screwdriver.

Step 4: Replace it with a new Strap, Standpipe-Beaded for the Speed Queen 33489 Washer and firmly secure the new strap in place.

Step 5: Reattach the top panel by firmly pushing it in place and reinstalling the screws.

Step 6: Reconnect the washer to the power source and check for proper operation.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.