WP61002140 Whirlpool Ice Cube Tray
Part #: WPL WP61002140
Whirlpool WP61002140 TRAY- ICE We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.4245 lbs
Dimension : 8.75 x 11.12 x 2
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WP61002140 TRAY- ICE We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.4245 lbs
Dimension : 8.75 x 11.12 x 2
Write Your Own Review
The following parts are replaced by this product
- 60112-1
- 61002140
- 129800952
- 129801003
1. Unplug the Refrigerator from its power source before beginning work.
2. Open the refrigerator door and locate the ice bin.
3. Remove the screws that are securing the ice bin tray to the refrigerator wall with a Phillips screwdriver.
4. Carefully lift the ice bin out of the freezer compartment.
5. Remove the ice bin tray from the ice bin by lifting it up slightly and then pulling it away.
6. Clean the bottom of the ice bin and surrounding area with warm water and dish soap.
7. Insert the new Whirlpool WP61002140 Tray-Ice into the ice bin and press down until it is secure.
8. Secure the ice bin tray back in place by replacing the screws with the Phillips screwdriver.
9. Return the ice bin back into the freezer compartment, pressing firmly until it is secure.
10. Plug in the refrigerator and enjoy your newly replace Whirlpool WP61002140 TRAY-ICE!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open the refrigerator door and locate the ice bin.
3. Remove the screws that are securing the ice bin tray to the refrigerator wall with a Phillips screwdriver.
4. Carefully lift the ice bin out of the freezer compartment.
5. Remove the ice bin tray from the ice bin by lifting it up slightly and then pulling it away.
6. Clean the bottom of the ice bin and surrounding area with warm water and dish soap.
7. Insert the new Whirlpool WP61002140 Tray-Ice into the ice bin and press down until it is secure.
8. Secure the ice bin tray back in place by replacing the screws with the Phillips screwdriver.
9. Return the ice bin back into the freezer compartment, pressing firmly until it is secure.
10. Plug in the refrigerator and enjoy your newly replace Whirlpool WP61002140 TRAY-ICE!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.