WP3150371 Whirlpool Control Knob
The Electric Range Surface Control Knob allows you to adjust the heating level of your gas cooktop surface burner. This knob is black and measures approximately 2" D. Remove the old knob by pulling it straight off its post. Replacing this part will require no tools, disassembly or repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Control Knob, Black
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Control Knob, Black
• No tools required for installation
Weight : 0.028800 lbs
Dimension : 2.000000 x 2.000000 x 1.000000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Electric Range Surface Control Knob allows you to adjust the heating level of your gas cooktop surface burner. This knob is black and measures approximately 2" D. Remove the old knob by pulling it straight off its post. Replacing this part will require no tools, disassembly or repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Control Knob, Black
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Control Knob, Black
• No tools required for installation
Weight : 0.028800 lbs
Dimension : 2.000000 x 2.000000 x 1.000000
Write Your Own Review
The following parts are replaced by this product
- 3150371
- 310834
DIY Guide to Replacing the Whirlpool WP3150371 Control Knob
Replacing a broken or worn control knob is an easy and cost-effective DIY task. This guide shows how to quickly and safely replace the Whirlpool WP3150371 control knob.
What You Will Need:
• Whirlpool WP3150371 Control Knob
• Screwdriver
• Replacement ring (if needed)
Step 1: Shut off Power to the Dryer
Shut off power to the dryer by unplugging it or flipping the breaker.
Step 2: Unscrew the Old Control Knob
Using a screwdriver, carefully remove the mounting screws from the back of the old knob.
Step 3: Remove the Control Knob
Gently pull the control knob away from the console and disconnect the wiring.
Step 4: Install Replacement Knob
Attach the new control knob to the console, line up all of the tabs, and reconnect the wires. Make sure all connections are secure.
Step 5: Reinstall the Mounting Screws
Reinstall the mounting screws to secure the new control knob to the console.
Step 6: Install the Replacement Ring (if Needed)
If you purchased a replacement ring, carefully insert it into the slot on the control knob.
Step 7: Restore Power
Restore power to the dryer and test the control knob.
Congratulations! You have successfully replaced the Whirlpool WP3150371 control knob.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing a broken or worn control knob is an easy and cost-effective DIY task. This guide shows how to quickly and safely replace the Whirlpool WP3150371 control knob.
What You Will Need:
• Whirlpool WP3150371 Control Knob
• Screwdriver
• Replacement ring (if needed)
Step 1: Shut off Power to the Dryer
Shut off power to the dryer by unplugging it or flipping the breaker.
Step 2: Unscrew the Old Control Knob
Using a screwdriver, carefully remove the mounting screws from the back of the old knob.
Step 3: Remove the Control Knob
Gently pull the control knob away from the console and disconnect the wiring.
Step 4: Install Replacement Knob
Attach the new control knob to the console, line up all of the tabs, and reconnect the wires. Make sure all connections are secure.
Step 5: Reinstall the Mounting Screws
Reinstall the mounting screws to secure the new control knob to the console.
Step 6: Install the Replacement Ring (if Needed)
If you purchased a replacement ring, carefully insert it into the slot on the control knob.
Step 7: Restore Power
Restore power to the dryer and test the control knob.
Congratulations! You have successfully replaced the Whirlpool WP3150371 control knob.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
