22003428 Whirlpool LEG Adjustable (W/NUT)

100% Guaranteed genuine parts logo
This Top Load Washer Leveling Leg is a metal replacement part that allows your appliance to sit perfectly flat. A stop nut is also included with this item. Install the new leveling leg and test to see if you have it adjusted properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Replacing this part will require basic hand tools, but no disassembly or repair experience. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Leveling Leg
• Tools Needed: Standard pliers

Weight : 0.1465 lbs
Dimension : 5 x 3.11 x 1.3
$6.71
In stock
This Top Load Washer Leveling Leg is a metal replacement part that allows your appliance to sit perfectly flat. A stop nut is also included with this item. Install the new leveling leg and test to see if you have it adjusted properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Replacing this part will require basic hand tools, but no disassembly or repair experience. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Leveling Leg
• Tools Needed: Standard pliers

Weight : 0.1465 lbs
Dimension : 5 x 3.11 x 1.3
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 302699
  2. 310934
  3. 312375
  4. 40039001
DIY Instructions for Replacing the Whirlpool 22003428 LEG, ADJUSTABLE (W/NUT):

1. Gather the necessary tools and supplies. You will need a Phillips-head screwdriver, adjustable wrench, and a new Whirlpool 22003428 LEG, ADJUSTABLE (W/NUT).

2. Cut off the power supply to the appliance. Unplug the appliance or shut off the breaker.

3. Remove any screws fastening the leg to the appliance by unscrewing them with a Phillips-head screwdriver.

4. Pull out the old leg from the appliance.

5. Insert the new leg into the appliance. Secure it in place with the supplied screws.

6. Use an adjustable wrench to securely tighten the nut onto the leg.

7. Restore the power supply to the appliance.

You have now successfully replaced theWhirlpool 22003428 LEG, ADJUSTABLE (W/NUT).

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool