WPW10195536 Whirlpool Water Inlet Valve
Whirlpool WPW10195536 INLET-WATR. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.285800 lbs
Dimension : 5.354300 x 4.960600 x 1.496000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool WPW10195536 INLET-WATR. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.285800 lbs
Dimension : 5.354300 x 4.960600 x 1.496000
Write Your Own Review
The following parts are replaced by this product
- 8531325
- W10195536
Step 1: Shut off and disconnect the power. Before beginning any repairs, you will want to make sure the power is shut off and disconnected from the appliance before starting any repairs.
Step 2: Remove the old inlet hose. Unscrew the old inlet hose and use a pair of pliers to remove it. Be careful when removing the hose so you don’t damage any of the surrounding parts.
Step 3: Install the new inlet hose. Place the new inlet hose in place and tighten it securely. Make sure there are no leaks or loose connections.
Step 4: Reconnect the power. After the new inlet hose has been installed, you can reconnect the power to the appliance.
Step 5: Test the connection. Once the power has been reconnected, run a few tests to make sure the new inlet hose is functioning properly. Watch for any leaks or other signs of malfunctioning.
Step 6: Enjoy your newly repaired appliance. Congratulations! You have successfully replaced the Whirlpool WPW10195536 INLET-WATR.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the old inlet hose. Unscrew the old inlet hose and use a pair of pliers to remove it. Be careful when removing the hose so you don’t damage any of the surrounding parts.
Step 3: Install the new inlet hose. Place the new inlet hose in place and tighten it securely. Make sure there are no leaks or loose connections.
Step 4: Reconnect the power. After the new inlet hose has been installed, you can reconnect the power to the appliance.
Step 5: Test the connection. Once the power has been reconnected, run a few tests to make sure the new inlet hose is functioning properly. Watch for any leaks or other signs of malfunctioning.
Step 6: Enjoy your newly repaired appliance. Congratulations! You have successfully replaced the Whirlpool WPW10195536 INLET-WATR.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
