WP3149400 Whirlpool Oven Infinite Switch
This Range Surface Burner Control Switch is a replacement part that operates your appliance's surface element, turning it off and on and regulating its heat intensity. This switch (also called the infinite switch) is for an 8-in burner, 8.9 - 11.0 amps, and sends voltage to the surface element coil. If your element remains at high heat or doesn’t turn on at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Weight : 0.246800 lbs
Dimension : 3.818800 x 3.622000 x 2.480300
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Range Surface Burner Control Switch is a replacement part that operates your appliance's surface element, turning it off and on and regulating its heat intensity. This switch (also called the infinite switch) is for an 8-in burner, 8.9 - 11.0 amps, and sends voltage to the surface element coil. If your element remains at high heat or doesn’t turn on at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Surface Burner Control Switch
• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers
Weight : 0.246800 lbs
Dimension : 3.818800 x 3.622000 x 2.480300
Write Your Own Review
The following parts are replaced by this product
- 3149400
- 310180
- 311858
- 311859
- 314140
- 3148954
- ER3149400
Replacing the WP3149400 Whirlpool Infinite Switch
1. Unplug your appliance from the wall outlet.
2. Remove the top panel of the appliance by unscrewing the screws located on either side.
3. Remove the rear cover of the control panel to gain access to the infinite switch.
4. Disconnect the power wires connected to the old switch, taking care to remember which wire is connected to which side of the switch.
5. Remove the mounting screws that secure the switch in place and lift the old switch out.
6. Place the new switch into position, securing it with the mounting screws.
7. Reconnect the power wires to the appropriate terminals on the new switch, being careful to reconnect the same wire to the same terminal as before.
8. Reinstall the rear cover of the control panel and secure it with the screws.
9. Replace the top panel of the appliance and secure it with the screws located on either side.
10. Plug your appliance into the wall outlet and test the new switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your appliance from the wall outlet.
2. Remove the top panel of the appliance by unscrewing the screws located on either side.
3. Remove the rear cover of the control panel to gain access to the infinite switch.
4. Disconnect the power wires connected to the old switch, taking care to remember which wire is connected to which side of the switch.
5. Remove the mounting screws that secure the switch in place and lift the old switch out.
6. Place the new switch into position, securing it with the mounting screws.
7. Reconnect the power wires to the appropriate terminals on the new switch, being careful to reconnect the same wire to the same terminal as before.
8. Reinstall the rear cover of the control panel and secure it with the screws.
9. Replace the top panel of the appliance and secure it with the screws located on either side.
10. Plug your appliance into the wall outlet and test the new switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
