W11502236 Whirlpool Door Trim
Whirlpool W11502236 Door Bar We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool W11502236 Door Bar We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- W10113759
- W10544179
- WPW10544179
- W11379944
DIY Guide to Replacing the Whirlpool W11502236 DOOR REINFORCEMENT STRAP 30"
Are you in need of replacing your Whirlpool W11502236 Door Reinforcement Strap 30"? If so, you’ve come to the right place. With just a few simple tools and steps, you can easily replace the door reinforcement strap yourself in no time.
Tools Needed:
-Phillips head screwdriver
-Flathead screwdriver
-New Whirlpool W11502236 Door Reinforcement Strap 30"
Instructions:
1. Unscrew the screws located on the sides of the refrigerator with a Phillips head screwdriver.
2. Take out the door panel by lifting it off of the fridge.
3. Locate the old door reinforcement strap.
4. With a flathead screwdriver, gently pry the strap off of the fridge.
5. Take the new Whirlpool W11502236 Door Reinforcement Strap 30" and place it in the same spot as the old one.
6. Secure the new strap with a flathead screwdriver.
7. Place the door panel back onto the fridge.
8. Screw in the screws to secure the door panel in place.
You are now finished with replacing the door reinforcement strap on your Whirlpool! Enjoy running your kitchen again with a fully functioning fridge.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you in need of replacing your Whirlpool W11502236 Door Reinforcement Strap 30"? If so, you’ve come to the right place. With just a few simple tools and steps, you can easily replace the door reinforcement strap yourself in no time.
Tools Needed:
-Phillips head screwdriver
-Flathead screwdriver
-New Whirlpool W11502236 Door Reinforcement Strap 30"
Instructions:
1. Unscrew the screws located on the sides of the refrigerator with a Phillips head screwdriver.
2. Take out the door panel by lifting it off of the fridge.
3. Locate the old door reinforcement strap.
4. With a flathead screwdriver, gently pry the strap off of the fridge.
5. Take the new Whirlpool W11502236 Door Reinforcement Strap 30" and place it in the same spot as the old one.
6. Secure the new strap with a flathead screwdriver.
7. Place the door panel back onto the fridge.
8. Screw in the screws to secure the door panel in place.
You are now finished with replacing the door reinforcement strap on your Whirlpool! Enjoy running your kitchen again with a fully functioning fridge.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
