76660 Whirlpool Syphon Break with Clamps
Ensure optimal performance and efficiency in your dryer with this reliable syphon break, designed to prevent backflow and maintain proper water drainage. Crafted by Whirlpool, this essential component comes complete with clamps for straightforward installation. It is compatible with a range of brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool, making it a versatile choice for various dryer models. Whether you're undertaking a simple repair or a full maintenance check, this syphon break is built to withstand the demands of daily use, ensuring your appliance operates smoothly. Maintain your dryer’s performance and maintain its longevity with this high-quality part.
Weight : 0.29 lbs
Dimension : 4.45 x 3.94 x 2.32
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Ensure optimal performance and efficiency in your dryer with this reliable syphon break, designed to prevent backflow and maintain proper water drainage. Crafted by Whirlpool, this essential component comes complete with clamps for straightforward installation. It is compatible with a range of brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool, making it a versatile choice for various dryer models. Whether you're undertaking a simple repair or a full maintenance check, this syphon break is built to withstand the demands of daily use, ensuring your appliance operates smoothly. Maintain your dryer’s performance and maintain its longevity with this high-quality part.
Weight : 0.29 lbs
Dimension : 4.45 x 3.94 x 2.32
Write Your Own Review
The following parts are replaced by this product
- 562P3
- 12001586
- 201112
- 33-4294N
- LP920
- LP930
- 297P3
- 33-1203
- 33-4260
- 386P3
- 76614
Replacing the Whirlpool 76660 SYPHON BREAK W CLAMPS
1. Shut off the hot and cold water supply valves located just before the Syphon Break W Clamps.
2. Disconnect the supply hose from the Syphon Break W Clamps.
3. Remove the clips securing the Syphon Break W Clamps.
4. Unscrew the nut holding the Syphon Break W Clamps to the supply line and remove the Syphon Break W Clamps.
5. Clean the supply line with a cloth to ensure it is free of debris.
6. Place the new Syphon Break W Clamps onto the supply line and tighten the nut to secure it in place.
7. Re-attach the supply hose to the Syphon Break W Clamps.
8. Turn on the water supply valves.
9. Check that the water is flowing properly and inspect the connections for any leaks.
10. If there are no leaks, turn on the faucet and check for any leaks.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off the hot and cold water supply valves located just before the Syphon Break W Clamps.
2. Disconnect the supply hose from the Syphon Break W Clamps.
3. Remove the clips securing the Syphon Break W Clamps.
4. Unscrew the nut holding the Syphon Break W Clamps to the supply line and remove the Syphon Break W Clamps.
5. Clean the supply line with a cloth to ensure it is free of debris.
6. Place the new Syphon Break W Clamps onto the supply line and tighten the nut to secure it in place.
7. Re-attach the supply hose to the Syphon Break W Clamps.
8. Turn on the water supply valves.
9. Check that the water is flowing properly and inspect the connections for any leaks.
10. If there are no leaks, turn on the faucet and check for any leaks.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
