WB24T10147 GE Oven Light Switch SPDT
General Electric - Hotpoint Range Oven Cooktop Oven Light Switch. SPDT WB24T10147We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.075300 lbs
Dimension : 5.629900 x 1.968500 x 0.944800
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric - Hotpoint Range Oven Cooktop Oven Light Switch. SPDT WB24T10147We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.075300 lbs
Dimension : 5.629900 x 1.968500 x 0.944800
Write Your Own Review
The following parts are replaced by this product
- WB24K5031
- WB24X5316
- WB24K10004
- WB24T10098
- WB24T10112
- 345078
Replacing the WB24T10147 GE Stove Range Oven Light Switch SPDT
1. Before starting, make sure that your power is completely disconnected to the stove range oven so that you don’t suffer any electrical shocks.
2. Unscrew the screws that are holding the back plate of the stove. You may have to use a Phillips head screwdriver for this step.
3. Remove the back plate by carefully pulling it away from the wall.
4. Disconnect the wires from the previous light switch and remove it from the wiring box.
5. Slide the new light switch into the wiring box and reconnect the wires as they were with the previous switch using a wire stripper or needle nose pliers.
6. Secure the new light switch in place with the screws provided with the package.
7. Test your new switch by turning the power back on to the range and checking the light.
8. Finally, reattach the back plate of the range and check the new switch one last time before replacing all the screws.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Before starting, make sure that your power is completely disconnected to the stove range oven so that you don’t suffer any electrical shocks.
2. Unscrew the screws that are holding the back plate of the stove. You may have to use a Phillips head screwdriver for this step.
3. Remove the back plate by carefully pulling it away from the wall.
4. Disconnect the wires from the previous light switch and remove it from the wiring box.
5. Slide the new light switch into the wiring box and reconnect the wires as they were with the previous switch using a wire stripper or needle nose pliers.
6. Secure the new light switch in place with the screws provided with the package.
7. Test your new switch by turning the power back on to the range and checking the light.
8. Finally, reattach the back plate of the range and check the new switch one last time before replacing all the screws.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
