WP67001668 Whirlpool Water Filter Housing
The SXS Refrigerator Water Filter Mounting Plate holds the water filter and connects the water lines to the water filter. If it's damaged and the water filter is loose, this plate may alleviate the issue. To access the part, open the right refrigerator door and remove the cover from the plate at the top right of the fridge by pressing the front lever holding it in. Then remove the cover from the refrigerator. Installing this part will require basic tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Water Filter Mounting Plate
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Water Filter Mounting Plate
• Tools Needed: Multi screwdriver
Weight : 0.9096 lbs
Dimension : 13.78 x 3.86 x 2.36
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The SXS Refrigerator Water Filter Mounting Plate holds the water filter and connects the water lines to the water filter. If it's damaged and the water filter is loose, this plate may alleviate the issue. To access the part, open the right refrigerator door and remove the cover from the plate at the top right of the fridge by pressing the front lever holding it in. Then remove the cover from the refrigerator. Installing this part will require basic tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Water Filter Mounting Plate
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Water Filter Mounting Plate
• Tools Needed: Multi screwdriver
Weight : 0.9096 lbs
Dimension : 13.78 x 3.86 x 2.36
Write Your Own Review
The following parts are replaced by this product
- 67001668
- 8171030
Replacing the Whirlpool WP67001668 Plate- Filter
1. Unplug the refrigerator from the power outlet and get rid of any ice in the bin or tray.
2. Turn off the water supply to the refrigerator by turning off the shut-off valve on the wall behind the refrigerator.
3. Locate the filter housing, typically found at the rear of the refrigerator, near the bottom of the fridge.
4. Remove the top of the filter housing by unscrewing the two screws at the top.
5. Carefully pull out the old filter from the housing, and dispose of it properly.
6. Take the new filter and remove the protective cap.
7. Insert the new filter into the housing. Make sure that it is properly positioned and lined up correctly with the housing.
8. Place the top back on the housing, and secure it in place with the two screws.
9. Turn the water supply back on, and flush the new filter for 5 minutes in order to clear any dirt or debris that may be present.
10. Plug the refrigerator back in, turn it on, and check for any water leaks around the filter housing.
Congratulations! You have successfully replaced the Whirlpool WP67001668 plate-filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the power outlet and get rid of any ice in the bin or tray.
2. Turn off the water supply to the refrigerator by turning off the shut-off valve on the wall behind the refrigerator.
3. Locate the filter housing, typically found at the rear of the refrigerator, near the bottom of the fridge.
4. Remove the top of the filter housing by unscrewing the two screws at the top.
5. Carefully pull out the old filter from the housing, and dispose of it properly.
6. Take the new filter and remove the protective cap.
7. Insert the new filter into the housing. Make sure that it is properly positioned and lined up correctly with the housing.
8. Place the top back on the housing, and secure it in place with the two screws.
9. Turn the water supply back on, and flush the new filter for 5 minutes in order to clear any dirt or debris that may be present.
10. Plug the refrigerator back in, turn it on, and check for any water leaks around the filter housing.
Congratulations! You have successfully replaced the Whirlpool WP67001668 plate-filter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
