W10613606 Whirlpool Refrigerator Start Device Relay Overload
This Refrigerator Compressor Start Device and Capacitor attaches to the compressor and helps the compressor turn on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides extra protection against excessive temperatures. If your refrigerator or freezer is too warm or won't turn on at all, replacing this assembly may alleviate these issues. You will need advanced mechanical training to make this repair. Specialized tools, complex testing and appliance calibration are required including but not limited to recovering and recharging the coolant in the sealed refrigeration system. We strongly recommend that you hire a qualified technician to safely install this part. Also turn off the refrigerator's water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Compressor Start Device and Capacitor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Compressor Start Device and Capacitor
• Tools Needed: Multi screwdriver
Weight : 0.1262 lbs
Dimension : 4.4488 x 2.0866 x 1.8897
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Refrigerator Compressor Start Device and Capacitor attaches to the compressor and helps the compressor turn on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides extra protection against excessive temperatures. If your refrigerator or freezer is too warm or won't turn on at all, replacing this assembly may alleviate these issues. You will need advanced mechanical training to make this repair. Specialized tools, complex testing and appliance calibration are required including but not limited to recovering and recharging the coolant in the sealed refrigeration system. We strongly recommend that you hire a qualified technician to safely install this part. Also turn off the refrigerator's water supply before you begin.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Compressor Start Device and Capacitor
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Compressor Start Device and Capacitor
• Tools Needed: Multi screwdriver
Weight : 0.1262 lbs
Dimension : 4.4488 x 2.0866 x 1.8897
Write Your Own Review
The following parts are replaced by this product
- 12468201
- 67003186
- 67003764
- 67005560
- 8171210
Replacing the W10613606 Whirlpool Start Device Relay Overload With Capacitor
DIY Instructions
1. Ensure you have the right tools and replacement parts. For the W10613606 Whirlpool Start Device Relay Overload, you will need a Phillips head screwdriver, a multimeter (or an ohmmeter), a soldering iron, solder, and a new capacitor rated to at least 105°C (220°F).
2. Turn off the power to the refrigerator by unplugging it or switching off the breaker.
3. Unscrew the screws holding the relay in place and carefully pull the relay out.
4. Check each connection (black, red, yellow) with your multimeter to ensure there is no voltage on any of them.
5. Disconnect the wires from the old relay.
6. Connect the wires to the new capacitor following the same color to color connections on the old relay.
7. Use the soldering iron to heat up the wires and attach them securely to the capacitor.
8. Carefully plug the refrigerator back in and turn it on.
9. Monitor the refrigerator for any sounds or signs that something is not working correctly.
10. Test the refrigerator to make sure it is running correctly.
These steps should help you easily replace the W10613606 Whirlpool Start Device Relay Overload. Be sure to double-check that all connections are secure before turning the power back on. Following these steps should help you complete this replacement safely and correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Ensure you have the right tools and replacement parts. For the W10613606 Whirlpool Start Device Relay Overload, you will need a Phillips head screwdriver, a multimeter (or an ohmmeter), a soldering iron, solder, and a new capacitor rated to at least 105°C (220°F).
2. Turn off the power to the refrigerator by unplugging it or switching off the breaker.
3. Unscrew the screws holding the relay in place and carefully pull the relay out.
4. Check each connection (black, red, yellow) with your multimeter to ensure there is no voltage on any of them.
5. Disconnect the wires from the old relay.
6. Connect the wires to the new capacitor following the same color to color connections on the old relay.
7. Use the soldering iron to heat up the wires and attach them securely to the capacitor.
8. Carefully plug the refrigerator back in and turn it on.
9. Monitor the refrigerator for any sounds or signs that something is not working correctly.
10. Test the refrigerator to make sure it is running correctly.
These steps should help you easily replace the W10613606 Whirlpool Start Device Relay Overload. Be sure to double-check that all connections are secure before turning the power back on. Following these steps should help you complete this replacement safely and correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
