WPW10112253 Whirlpool Gear Assembly
The KitchenAid® Stand Mixer Worm Drive Gear is one of the drive gears in your mixer. If the teeth of the gear are worn or damanged or if your mixer's motor is on but nothing is moving, you may need to replace this part. You will need to remove the planetary from the mixer, the cover on the back of the mixer and the base to access this part. Replacing this part will require basic tools, some disassembly of the stand mixer and some repair experience. You must unplug the appliance before installing this part and make sure all the attachments are removed.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) KitchenAid® Stand Mixer Worm Drive Gear
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) KitchenAid® Stand Mixer Worm Drive Gear
• Tools Needed: Multi screwdriver
Weight : 0.057600 lbs
Dimension : 1.500000 x 1.500000 x 1.620000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The KitchenAid® Stand Mixer Worm Drive Gear is one of the drive gears in your mixer. If the teeth of the gear are worn or damanged or if your mixer's motor is on but nothing is moving, you may need to replace this part. You will need to remove the planetary from the mixer, the cover on the back of the mixer and the base to access this part. Replacing this part will require basic tools, some disassembly of the stand mixer and some repair experience. You must unplug the appliance before installing this part and make sure all the attachments are removed.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) KitchenAid® Stand Mixer Worm Drive Gear
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) KitchenAid® Stand Mixer Worm Drive Gear
• Tools Needed: Multi screwdriver
Weight : 0.057600 lbs
Dimension : 1.500000 x 1.500000 x 1.620000
Write Your Own Review
The following parts are replaced by this product
- 4162897
- W10112253
DIY Guide to Replacing the Whirlpool WPW10112253 GEAR-WORM
Replacing the Whirlpool WPW10112253 GEAR-WORM is a job that requires a certain level of expertise. But with the right tools and some patience, anyone can complete this repair! Follow our step-by-step guide for a successful replacement.
Tools Needed:
#2 Phillips Screwdriver, Flathead Screwdriver, ¼-inch Ratchet, Socket Wrench Set, Needle Nose Pliers
Step 1: Locate the old GEAR-WORM. Shut off the power to your washer and unplug it from the wall. Then remove the back panel from the washer by loosening the screws along the back edge.
Step 2: Disconnect the wiring harnesses that are connected to the old GEAR-WORM. Use the needle nose pliers to squeeze the plastic connectors and pull the wires off.
Step 3: Remove the two screws at the top of the old GEAR-WORM. With the #2 Phillips screwdriver, unscrew the screws and pull the part out of the washer.
Step 4: Insert the new GEAR-WORM. Place the new GEAR-WORM into the opening and secure it with the two screws. Reconnect the wiring harnesses and make sure that they are firmly attached.
Step 5: Reattach the back panel. Align the panel with the slots in the washer frame and tighten the screws to hold the panel in place.
Step 6: Test the new GEAR-WORM. Plug the washer back in and turn on the power. Start a cycle to test the new GEAR-WORM and make sure that the washer is working properly.
Congratulations! You have successfully replaced the Whirlpool WPW10112253 GEAR-WORM. If you encounter any problems during the installation process, please contact a professional appliance repair technician for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool WPW10112253 GEAR-WORM is a job that requires a certain level of expertise. But with the right tools and some patience, anyone can complete this repair! Follow our step-by-step guide for a successful replacement.
Tools Needed:
#2 Phillips Screwdriver, Flathead Screwdriver, ¼-inch Ratchet, Socket Wrench Set, Needle Nose Pliers
Step 1: Locate the old GEAR-WORM. Shut off the power to your washer and unplug it from the wall. Then remove the back panel from the washer by loosening the screws along the back edge.
Step 2: Disconnect the wiring harnesses that are connected to the old GEAR-WORM. Use the needle nose pliers to squeeze the plastic connectors and pull the wires off.
Step 3: Remove the two screws at the top of the old GEAR-WORM. With the #2 Phillips screwdriver, unscrew the screws and pull the part out of the washer.
Step 4: Insert the new GEAR-WORM. Place the new GEAR-WORM into the opening and secure it with the two screws. Reconnect the wiring harnesses and make sure that they are firmly attached.
Step 5: Reattach the back panel. Align the panel with the slots in the washer frame and tighten the screws to hold the panel in place.
Step 6: Test the new GEAR-WORM. Plug the washer back in and turn on the power. Start a cycle to test the new GEAR-WORM and make sure that the washer is working properly.
Congratulations! You have successfully replaced the Whirlpool WPW10112253 GEAR-WORM. If you encounter any problems during the installation process, please contact a professional appliance repair technician for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
