WP8318084 Whirlpool Washer Lid Switch Assembly
Part #: WPL WP8318084
The Top Load Washer Lid Switch Assembly ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, replacing this part may alleviate the issue. This part includes the green grounding wire. Note that you will need to access the back of the washer to complete this repair. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Assembly
• Tools Needed: Multi screwdriver
Weight : 0.186600 lbs
Dimension : 4.330700 x 3.307000 x 1.811000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Top Load Washer Lid Switch Assembly ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, replacing this part may alleviate the issue. This part includes the green grounding wire. Note that you will need to access the back of the washer to complete this repair. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Assembly
• Tools Needed: Multi screwdriver
Weight : 0.186600 lbs
Dimension : 4.330700 x 3.307000 x 1.811000
Write Your Own Review
The following parts are replaced by this product
- 8318084
- WP8318084VP
Replacing the WP8318084 Whirlpool Washer Lid Switch Assembly
For those who own a Whirlpool Washer, the WP8318084 is the replacement lid switch assembly. This important and relatively simple repair process should be done each time the washer lid switch needs to be replaced, as it helps the appliance run efficiently and safely. With just a few steps and tools, you can easily replace your washer's lid switch assembly.
Instructions:
1. Unplug the power cord from the wall outlet, and shut off the water supply valve.
2. Pull the washer away from the wall, and take off the lower rear panel underneath the back of the washer.
3. Find the current lid switch assembly and loosen the two screws that are holding it in place.
4. Lift the old switch assembly up and away from the washer, and disconnect the two wiring harnesses connected to it.
5. Carefully remove any excess glue or residue left on connections from the previous switch.
6. Place the new WP8318084 lid switch assembly into position, and reconnect the wiring harnesses.
7. Secure the lid switch with the two screws.
8. Reattach the lower rear panel to the washer, and turn the water supply valve back on.
9. Plug the power cord back into the wall outlet.
10. Test the new switch by closing the washer lid and observing if the washer starts.
By following these easy steps, you should now have successfully replaced the WP8318084 Whirlpool Washer Lid Switch Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
For those who own a Whirlpool Washer, the WP8318084 is the replacement lid switch assembly. This important and relatively simple repair process should be done each time the washer lid switch needs to be replaced, as it helps the appliance run efficiently and safely. With just a few steps and tools, you can easily replace your washer's lid switch assembly.
Instructions:
1. Unplug the power cord from the wall outlet, and shut off the water supply valve.
2. Pull the washer away from the wall, and take off the lower rear panel underneath the back of the washer.
3. Find the current lid switch assembly and loosen the two screws that are holding it in place.
4. Lift the old switch assembly up and away from the washer, and disconnect the two wiring harnesses connected to it.
5. Carefully remove any excess glue or residue left on connections from the previous switch.
6. Place the new WP8318084 lid switch assembly into position, and reconnect the wiring harnesses.
7. Secure the lid switch with the two screws.
8. Reattach the lower rear panel to the washer, and turn the water supply valve back on.
9. Plug the power cord back into the wall outlet.
10. Test the new switch by closing the washer lid and observing if the washer starts.
By following these easy steps, you should now have successfully replaced the WP8318084 Whirlpool Washer Lid Switch Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.