WPW10757217 Whirlpool Circulation Pump and Motor

Replacing the WPW10757217 Whirlpool Circulation Pump and Motor

Overview:

This DIY guide describes how to replace the WPW10757217 Whirlpool Circulation Pump and Motor. This is an intermediate project that requires basic electrical and mechanical skills. Safety first: Make sure to power down and unplug the appliance before beginning this repair.

Tools required:

• Phillips head screwdriver

• Pliers

• Flat head screwdriver

• Wrench

Steps:

1. Unplug the appliance.

2. Locate the affected pump and motor assembly.

3. Remove any screws or bolts securing the assembly in place.

4. Disconnect the wiring on the backside of the assembly.

5. Using a wrench, disconnect the hoses connected to the assembly.

6. Carefully pull out the assembly.

7. Install the new pump and motor assembly, making sure to reconnect the hoses and wiring.

8. Secure the assembly with the screws or bolts.

9. Plug the appliance back in and turn it on.

10. Test the operation of the circulation pump and motor.

Congratulations! You have successfully replaced the WPW10757217 Whirlpool Circulation Pump and Motor.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.