WP12722803B Whirlpool Door Guide
This French Door Refrigerator Flipper Assembly creates an airtight seal between the doors on your French Door refrigerator. In order to replace the part, remove the screw from the flipper and lift it upward. Pop the wire harness loose, and replace with the new flipper. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Flipper Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Flipper Assembly
• Tools Needed: Multi screwdriver
Weight : 2.7842 lbs
Dimension : 3.44 x 2.82 x 42.94
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This French Door Refrigerator Flipper Assembly creates an airtight seal between the doors on your French Door refrigerator. In order to replace the part, remove the screw from the flipper and lift it upward. Pop the wire harness loose, and replace with the new flipper. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Flipper Assembly
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) French Door Refrigerator Flipper Assembly
• Tools Needed: Multi screwdriver
Weight : 2.7842 lbs
Dimension : 3.44 x 2.82 x 42.94
Write Your Own Review
The following parts are replaced by this product
- 67003264
- 8208250
- 67004131
- 12722803B
Replacing the Whirlpool WP12722803B RAIL-MULLN
Replacing the rail-mullion on your Whirlpool refrigerator is a simple do-it-yourself task that can be done in a few minutes. All you need is a few common tools and a replacement part to complete this job. Here’s how:
1. Unplug the refrigerator from the wall outlet and disconnect the waterline if applicable.
2. Remove any items stored around the area where the rail-mullion needs to be replaced.
3. Use a putty knife to remove any plastic or rubber trim pieces from the outer edge of the door.
4. Unscrew the screws that are securing the rail-mullion.
5. Pull away the old rail-mullion from the door.
6. Place the new rail-mullion into the same area, making sure it’s facing the same direction as the old one.
7. Secure the new rail-mullion with the screws that you removed in Step 4.
8. Check that the new rail-mullion is securely in place by opening and closing the door.
9. Replace any plastic or rubber trim pieces that you removed in Step 3.
10. Plug the refrigerator back into the wall outlet and connect the waterline if applicable.
You’ve now successfully replaced the rail-mullion on your Whirlpool refrigerator. Enjoy the convenience of having a properly functioning appliance again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the rail-mullion on your Whirlpool refrigerator is a simple do-it-yourself task that can be done in a few minutes. All you need is a few common tools and a replacement part to complete this job. Here’s how:
1. Unplug the refrigerator from the wall outlet and disconnect the waterline if applicable.
2. Remove any items stored around the area where the rail-mullion needs to be replaced.
3. Use a putty knife to remove any plastic or rubber trim pieces from the outer edge of the door.
4. Unscrew the screws that are securing the rail-mullion.
5. Pull away the old rail-mullion from the door.
6. Place the new rail-mullion into the same area, making sure it’s facing the same direction as the old one.
7. Secure the new rail-mullion with the screws that you removed in Step 4.
8. Check that the new rail-mullion is securely in place by opening and closing the door.
9. Replace any plastic or rubber trim pieces that you removed in Step 3.
10. Plug the refrigerator back into the wall outlet and connect the waterline if applicable.
You’ve now successfully replaced the rail-mullion on your Whirlpool refrigerator. Enjoy the convenience of having a properly functioning appliance again.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
