WR2X4901 GE Door Hinge Cam Riser
The GE Refrigerator Door Hinge Cam Riser is a great way to keep your refrigerator door in place. This is the plastic piece that on the lower door hinge pin. It has grooves in it that allows your door to rise & fall when opening and closing. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0518 lbs
Dimension : 6 x 6 x 0.2
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The GE Refrigerator Door Hinge Cam Riser is a great way to keep your refrigerator door in place. This is the plastic piece that on the lower door hinge pin. It has grooves in it that allows your door to rise & fall when opening and closing. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0518 lbs
Dimension : 6 x 6 x 0.2
Write Your Own Review
The following parts are replaced by this product
- SWR2X4901
- WR02X4901
Replacing the GE Refrigerator Door Hinge Cam Riser
1. Gently pry open the refrigerator door.
2. Pull out the door hinge cam risers. Make sure to keep the old ones off to the side so you can double check measurements in the next step.
3. Measure the new door hinge cam risers to make sure they are the same size as the old ones.
4. Place the new door hinge cam risers into the spot previously occupied by the old ones.
5. Line up the screws on the door and use a screwdriver to secure the cam risers in place.
6. Put the door back on the refrigerator and ensure it is securely in place.
7. Test the door to ensure it opens and closes properly.
By following these simple guidelines, you can easily replace the GE Refrigerator Door Hinge Cam Riser in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gently pry open the refrigerator door.
2. Pull out the door hinge cam risers. Make sure to keep the old ones off to the side so you can double check measurements in the next step.
3. Measure the new door hinge cam risers to make sure they are the same size as the old ones.
4. Place the new door hinge cam risers into the spot previously occupied by the old ones.
5. Line up the screws on the door and use a screwdriver to secure the cam risers in place.
6. Put the door back on the refrigerator and ensure it is securely in place.
7. Test the door to ensure it opens and closes properly.
By following these simple guidelines, you can easily replace the GE Refrigerator Door Hinge Cam Riser in no time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
