WB08T10002 GE Oven Cooktop Lamp 40W 120V Bulb
GE General Electric Hotpoint Sears Kenmore Range Oven Cooktop Appliance Oven Lamp Assembly WB08T10002
● Bulb only 40W 120V Standard Base part# 40A15
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● Bulb only 40W 120V Standard Base part# 40A15
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.4635 lbs
Dimension : 4.6062 x 3.7795 x 3.7007
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE General Electric Hotpoint Sears Kenmore Range Oven Cooktop Appliance Oven Lamp Assembly WB08T10002
● Bulb only 40W 120V Standard Base part# 40A15
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● Bulb only 40W 120V Standard Base part# 40A15
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.4635 lbs
Dimension : 4.6062 x 3.7795 x 3.7007
Write Your Own Review
The following parts are replaced by this product
- WB08T10002-24PK
1. Unplug the stove and make sure all burners are off.
2. Remove the screws that secure the bottom of the plastic lamp assembly to the back wall of the stove.
3. Gently pull the lamp assembly away from the wall and disconnect any wire connections or clips holding it in place.
4. Remove the bulb by gently twisting it counterclockwise.
5. Replace the old bulb with a new GE Stove Range Oven Cooktop Appliance Lamp Assembly - 40W 120V bulb.
6. Reconnect any wire connections or clips that were disconnected.
7. Secure the bottom of the plastic lamp assembly back to the wall with the screws you removed in step 2.
8. Plug in the oven and test the new bulb.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the screws that secure the bottom of the plastic lamp assembly to the back wall of the stove.
3. Gently pull the lamp assembly away from the wall and disconnect any wire connections or clips holding it in place.
4. Remove the bulb by gently twisting it counterclockwise.
5. Replace the old bulb with a new GE Stove Range Oven Cooktop Appliance Lamp Assembly - 40W 120V bulb.
6. Reconnect any wire connections or clips that were disconnected.
7. Secure the bottom of the plastic lamp assembly back to the wall with the screws you removed in step 2.
8. Plug in the oven and test the new bulb.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
