WPW10190965 Whirlpool Refrigerator Ice Maker Assembly

100% Guaranteed genuine parts logo
Part #: WPL WPW10190965
100% Guaranteed genuine parts logo
The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This part makes 8 radius ice cubes at a time. The assembly includes (1) wiring harness, (1) ice bin assembly, (2) mounting clips and installation instructions. If your appliance isn't producing ice as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: This assembly does not include the front cover, wire harness or shut-off arm; we recommend that you use these parts from the old ice maker.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver

Weight : 4.935300 lbs
Dimension : 14.440000 x 7.440000 x 7.380000
Special Price $54.51 Regular Price $60.57 10% off
In stock
The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills again until the ice storage bin is filled. This part makes 8 radius ice cubes at a time. The assembly includes (1) wiring harness, (1) ice bin assembly, (2) mounting clips and installation instructions. If your appliance isn't producing ice as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Helpful Tip: This assembly does not include the front cover, wire harness or shut-off arm; we recommend that you use these parts from the old ice maker.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) SxS Refrigerator Ice Maker Assembly
• Tools Needed: Multi screwdriver

Weight : 4.935300 lbs
Dimension : 14.440000 x 7.440000 x 7.380000
Write Your Own Review
You're reviewing:WPW10190965 Whirpool SxS Refrigerator Ice Maker Assembly
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. 626662
  2. 626661
  3. W10122506
  4. W10190965
Step 1 - Unplug the Refrigerator
Before you begin, make sure the refrigerator is unplugged to ensure there is no power running to the unit.

Step 2 - Empty Ice Bins and Dispenser
Remove all ice from the ice maker bins, and empty out the ice dispenser.

Step 3 - Disconnect Water Supply Line
Locate the inlet water line where it connects to the wall behind the refrigerator. Disconnect the supply line by squeezing the quick connect coupling and pulling it off the inlet.

Step 4 - Remove Ice Maker
Remove the screws from the back of the refrigerator that are holding the ice maker in place. Then, gently pull the ice maker out from the back of the refrigerator.

Step 5 - Install New Ice Maker
Insert the new ice maker assembly into the back of the refrigerator. Secure the ice maker with the screws that were removed in Step 4.

Step 6 - Reconnect Water Supply Line
Connect the inlet water line to the new ice maker assembly.

Step 7 - Plug in Refrigerator
Plug the power cord of the refrigerator into a grounded outlet.

Step 8 - Test Ice Maker
After a few hours, check to make sure the ice maker is functioning properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with