WP67001716 Whirlpool Refrigerator Shelf Support Clip Ladder Hook
This Refrigerator Rear Shelf Support Hook, also called the Ladder Hook, is attached to the side ladders of your refrigerator and is used for supporting the crisper shelf. To access the part, pull out both crisper drawers in your fridge and the crisper shelf. Installation will require basic hand tools, minor disassembly of the unit and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Rear Shelf Support Hook
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Rear Shelf Support Hook
• Tools Needed: Multi screwdriver
Weight : 0.0589 lbs
Dimension : 3.5826 x 1.4173 x 1.6141
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Refrigerator Rear Shelf Support Hook, also called the Ladder Hook, is attached to the side ladders of your refrigerator and is used for supporting the crisper shelf. To access the part, pull out both crisper drawers in your fridge and the crisper shelf. Installation will require basic hand tools, minor disassembly of the unit and novice repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Rear Shelf Support Hook
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Rear Shelf Support Hook
• Tools Needed: Multi screwdriver
Weight : 0.0589 lbs
Dimension : 3.5826 x 1.4173 x 1.6141
Write Your Own Review
The following parts are replaced by this product
- 67001716
Replacing the Whirlpool WP67001716 HOOK-LADD
DIY Installation Instructions:
1. Before beginning, make sure you have all the necessary tools and replacement parts on hand. You will need a Phillips screwdriver, flathead screwdriver, new Hook-Ladd replacement, and Whirlpool WP67001716 Hook-Ladd.
2. Unplug the appliance from the power source.
3. Once unplugged, locate the screws that secure the Hook-Ladd to the appliance. They can usually be found along the side or behind the appliance.
4. Use a Phillips screwdriver to remove the screws that secure the Hook-Ladd to the appliance. Be sure to place the screws in a safe place for later use.
5. Unscrew the Hook-Ladd from the appliance and remove it from the unit.
6. Take the new Hook-Ladd replacement and line up to the mounting holes on the appliance.
7. Secure the new Hook-Ladd to the appliance using the previously removed screws.
8. Plug in the appliance and test the Hook-Ladd to ensure it is working properly.
Congratulations, you have now successfully replaced the Whirlpool WP67001716 Hook-Ladd!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Installation Instructions:
1. Before beginning, make sure you have all the necessary tools and replacement parts on hand. You will need a Phillips screwdriver, flathead screwdriver, new Hook-Ladd replacement, and Whirlpool WP67001716 Hook-Ladd.
2. Unplug the appliance from the power source.
3. Once unplugged, locate the screws that secure the Hook-Ladd to the appliance. They can usually be found along the side or behind the appliance.
4. Use a Phillips screwdriver to remove the screws that secure the Hook-Ladd to the appliance. Be sure to place the screws in a safe place for later use.
5. Unscrew the Hook-Ladd from the appliance and remove it from the unit.
6. Take the new Hook-Ladd replacement and line up to the mounting holes on the appliance.
7. Secure the new Hook-Ladd to the appliance using the previously removed screws.
8. Plug in the appliance and test the Hook-Ladd to ensure it is working properly.
Congratulations, you have now successfully replaced the Whirlpool WP67001716 Hook-Ladd!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
