W10874836 Whirlpool Endcap Assembly Left Hand and Right
The Bottom Freezer Refrigerator Drawer Support End Caps snap into place on the appliance’s pantry drawer to help contain the items inside. Note that your pantry drawer has two end caps; these caps are a set of two designed to be used for both the left and right sides. This item is constructed of durable white plastic and can be used to easily replace a broken or missing part. Installation will not require tools or repair experience, but does involve minor disassembly of the refrigerator. Recommended Accessory: Drawer Liner (item #2151512780)Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (2) Bottom Freezer Refrigerator Drawer Support End Caps• Tools Needed: Multi screwdriver
Weight : 6.676300 lbs
Dimension : 8.320000 x 4.320000 x 28.940000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Bottom Freezer Refrigerator Drawer Support End Caps snap into place on the appliance’s pantry drawer to help contain the items inside. Note that your pantry drawer has two end caps; these caps are a set of two designed to be used for both the left and right sides. This item is constructed of durable white plastic and can be used to easily replace a broken or missing part. Installation will not require tools or repair experience, but does involve minor disassembly of the refrigerator. Recommended Accessory: Drawer Liner (item #2151512780)Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (2) Bottom Freezer Refrigerator Drawer Support End Caps• Tools Needed: Multi screwdriver
Weight : 6.676300 lbs
Dimension : 8.320000 x 4.320000 x 28.940000
Write Your Own Review
Instructions for Replacing a Whirlpool W10874836 Encap LH and RH
1. Unplug the power cord of the Whirlpool front-loading washing machine before you start.
2. Remove the screws from the bottom of the control panel on the front of the machine; lift the panel off to reveal the parts inside.
3. Locate the Whirlpool Encap LH and RH, two small, plastic pieces at the lower portion of the washer drum.
4. Unhook the wire harness from the Encap LH and RH, reaching up under the panel to do so.
5. Grasp the Encap LH and RH with your fingers and pull them out of place.
6. Reach into the opening left behind in the drum and grab the new Encap LH and RH.
7. Insert the new Encap parts into place, securing them with your fingers.
8. Hook the wire harness back onto the Encap LH and RH, being careful not to damage the delicate wires.
9. Replace the panel on the front of the machine, securing it with the screws you removed earlier.
10. Re-plug the power cord into the wall socket and turn the washing machine back on to test that it is working.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the power cord of the Whirlpool front-loading washing machine before you start.
2. Remove the screws from the bottom of the control panel on the front of the machine; lift the panel off to reveal the parts inside.
3. Locate the Whirlpool Encap LH and RH, two small, plastic pieces at the lower portion of the washer drum.
4. Unhook the wire harness from the Encap LH and RH, reaching up under the panel to do so.
5. Grasp the Encap LH and RH with your fingers and pull them out of place.
6. Reach into the opening left behind in the drum and grab the new Encap LH and RH.
7. Insert the new Encap parts into place, securing them with your fingers.
8. Hook the wire harness back onto the Encap LH and RH, being careful not to damage the delicate wires.
9. Replace the panel on the front of the machine, securing it with the screws you removed earlier.
10. Re-plug the power cord into the wall socket and turn the washing machine back on to test that it is working.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
