8193983 Whirlpool Spinner Kit
This Dishwasher Upper Wash Arm Spinner distributes water from the feed tube across the top of the dishwasher tub to clean the dishes below. If yours is clogged or worn, it stops spraying the water and may need to be replaced. After removing the dishwasher racks, place a towel down on top of the pump to catch any screws that might fall. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Wash Arm Spinner
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Wash Arm Spinner
• Tools Needed: Multi screwdriver
Weight : 0.071100 lbs
Dimension : 3.350000 x 2.990000 x 0.980000
This Dishwasher Upper Wash Arm Spinner distributes water from the feed tube across the top of the dishwasher tub to clean the dishes below. If yours is clogged or worn, it stops spraying the water and may need to be replaced. After removing the dishwasher racks, place a towel down on top of the pump to catch any screws that might fall. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Wash Arm Spinner
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dishwasher Upper Wash Arm Spinner
• Tools Needed: Multi screwdriver
Weight : 0.071100 lbs
Dimension : 3.350000 x 2.990000 x 0.980000
Write Your Own Review
Replacing the 8193983 Whirlpool Spinner Kit: DIY Instructions
1. To begin, unplug your dryer from the wall outlet and shut off its power source.
2. Carefully slide your dryer out from the wall, and remove the back panel that covers the dryer’s motor and motor components. Use a screwdriver to loosen any screws that are holding this panel in place.
3. Locate the 8193983 Whirlpool Spinner Kit, which should be attached to the motor and the drum axle. Unscrew the bolts that are affixing it to the axle, and then carefully remove the kit.
4. Take your new 8193983 Whirlpool Spinner Kit, and position it in the exact same spot as the previous one. Make sure that it is properly positioned and secure before continuing.
5. Re-attach the new spinner kit to the drum axle with the same bolts you removed, and use your screwdriver to tighten them into place.
6. Once all of the bolts have been tightened, reattach the back panel of your dryer, ensuring that all of the screws have been replaced.
7. Plug your dryer back into the outlet and turn on its power source. Test to see if the new Whirlpool spinner kit works properly.
8. If everything runs smoothly, you have successfully replaced the 8193983 Whirlpool Spinner Kit. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. To begin, unplug your dryer from the wall outlet and shut off its power source.
2. Carefully slide your dryer out from the wall, and remove the back panel that covers the dryer’s motor and motor components. Use a screwdriver to loosen any screws that are holding this panel in place.
3. Locate the 8193983 Whirlpool Spinner Kit, which should be attached to the motor and the drum axle. Unscrew the bolts that are affixing it to the axle, and then carefully remove the kit.
4. Take your new 8193983 Whirlpool Spinner Kit, and position it in the exact same spot as the previous one. Make sure that it is properly positioned and secure before continuing.
5. Re-attach the new spinner kit to the drum axle with the same bolts you removed, and use your screwdriver to tighten them into place.
6. Once all of the bolts have been tightened, reattach the back panel of your dryer, ensuring that all of the screws have been replaced.
7. Plug your dryer back into the outlet and turn on its power source. Test to see if the new Whirlpool spinner kit works properly.
8. If everything runs smoothly, you have successfully replaced the 8193983 Whirlpool Spinner Kit. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
