W11164152 Whirlpool Drawer Roller

Step 1: Gather All the Necessary Tools

In order to replace the Whirlpool W11164152 ROLLER, you will need the following tools:

•Flathead Screwdriver
•Phillips-head Screwdriver
•Pliers
•Replacement Whirlpool W11164152 ROLLER

Step 2: Unplug Your Appliance

To begin the process, unplug your appliance from its power supply. This will ensure your safety while working on the roller.

Step 3: Use Flathead Screwdriver to Remove Wheel

Using the flathead screwdriver, carefully remove the wheel from the bottom of the appliance. Make sure to support the weight of the wheel as you remove it with your hands.

Step 4: Use Philips-head Screwdriver to Unscrew Bearing

Use the Phillips-head screwdriver to unscrew the bearing from the roller. Once the bearing is removed, slide the roller off of the appliance.

Step 5: Place Replacement Roller on Appliance

Put your replacement Whirlpool W11164152 ROLLER onto the appliance. Secure it by screwing in the bearing with the Phillips-head screwdriver.

Step 6: Reattach Wheel

Reattach the wheel to the bottom of the appliance, using the flathead screwdriver. Make sure the wheel is securely fastened.

Step 7: Plug in Appliance

Finally, plug the appliance back into its power source and test out the new roller.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.