WP2305258 Whirlpool Dispenser Door Assembly

Replacing the Whirlpool WP2305258 DOOR-CHUTE CATCH

This step-by-step guide will show you how to easily replace the door-chute catch of your Whirlpool WP2305258.

Tools Needed:

-Phillips head screwdriver

-Putty knife or flathead screwdriver

-Replacement door-chute catch (Whirlpool WP2305258)

Instructions:

1. Disconnect the power source to the appliance. This can be done either by unplugging the cord from the wall socket or tripping the circuit breaker.

2. Unscrew the old door-chute catch using a Phillips head screwdriver.

3. Carefully remove the old chute catch using a putty knife or flathead screwdriver. You may need to use some force as it may be stuck in place.

4. Insert the new door-chute catch into the opening and make sure it is flush with the door.

5. Secure the new door-chute catch in place by tightly screwing the Phillips head screws back in.

6. Reconnect the power source to the appliance.

7. Test the door-chute catch to ensure it is installed correctly and works properly.

Your Whirlpool WP2305258 door-chute catch is now successfully replaced!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.