D510702 Speed Queen Dryer High Limit Thermostat

D510702 Speed Queen Dryer High Limit Thermostat
Weight : 0.010600 lbs
Dimension : 2.165300 x 1.732200 x 0.393700
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
D510702 Speed Queen Dryer High Limit Thermostat
Weight : 0.010600 lbs
Dimension : 2.165300 x 1.732200 x 0.393700
Write Your Own Review
The following parts are replaced by this product
- 510702
1. Unplug the Speed Queen D510702 washing machine from the power source before beginning any repair and maintenance procedures.
2. Remove the back panel of the washer using a Phillips screwdriver.
3. Locate the thermostat-limit-BLK inside the machine.
4. Disconnect the wires connected to the thermostat-limit-BLK by gently pulling on them.
5. Remove the screws holding the thermostat-limit-BLK in place using a Phillips screwdriver.
6. Place the new thermostat-limit-BLK in the same hole that the old one was in.
7. Secure the thermostat-limit-BLK with the screws that were used to remove the old thermostat-limit-BLK.
8. Reconnect the wires to the new thermostat-limit-BLK.
9. Replace the back panel of the washing machine.
10. Plug the washing machine back into its power source.
11. Test the thermostat-limit-BLK by running a wash cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the back panel of the washer using a Phillips screwdriver.
3. Locate the thermostat-limit-BLK inside the machine.
4. Disconnect the wires connected to the thermostat-limit-BLK by gently pulling on them.
5. Remove the screws holding the thermostat-limit-BLK in place using a Phillips screwdriver.
6. Place the new thermostat-limit-BLK in the same hole that the old one was in.
7. Secure the thermostat-limit-BLK with the screws that were used to remove the old thermostat-limit-BLK.
8. Reconnect the wires to the new thermostat-limit-BLK.
9. Replace the back panel of the washing machine.
10. Plug the washing machine back into its power source.
11. Test the thermostat-limit-BLK by running a wash cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.


