36425 Speed Queen Seal Bell & Transmission Tube
36425 Speed Queen Seal Bell & Transmission Tube
Weight : 0.362300 lbs
Dimension : 4.880000 x 3.940000 x 2.600000
36425 Speed Queen Seal Bell & Transmission Tube
Weight : 0.362300 lbs
Dimension : 4.880000 x 3.940000 x 2.600000
Write Your Own Review
1. Begin by disconnecting power to the Speed Queen 36425 washing machine. This can be done from the main circuit breaker panel.
2. Unplug the machine and place a flat surface beneath the machine. You will need to flip the machine over in order to access the back end of it where the seal bell and transmission tube are located.
3. Place a towel on the floor beneath the machine as it will assist you in moving the appliance safely and prevent it from slipping.
4. Remove the screws that secure both the top and bottom panels and carefully remove the panels.
5. Disconnect the hoses from the seal bell and the transmission tube. Make sure to use a wrench and secure the hoses tightly so they don’t leak.
6. Remove the old seal bell and transmission tube, paying close attention to how the parts were situated in the machine. This will make it easier to install the new parts.
7. Replace the seal bell and transmission tube with the new parts. Make sure to tighten the screws and reconnect the hoses.
8. Reattach the top and bottom panels and secure them with screws.
9. Plug the machine back in and turn the power back on.
10. Test the machine to ensure the new parts have been installed correctly.
Follow these steps to easily replace the Speed Queen 36425 seal bell and transmission tube. With proper care and maintenance, your machine should stay running in good condition for its lifespan.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Unplug the machine and place a flat surface beneath the machine. You will need to flip the machine over in order to access the back end of it where the seal bell and transmission tube are located.
3. Place a towel on the floor beneath the machine as it will assist you in moving the appliance safely and prevent it from slipping.
4. Remove the screws that secure both the top and bottom panels and carefully remove the panels.
5. Disconnect the hoses from the seal bell and the transmission tube. Make sure to use a wrench and secure the hoses tightly so they don’t leak.
6. Remove the old seal bell and transmission tube, paying close attention to how the parts were situated in the machine. This will make it easier to install the new parts.
7. Replace the seal bell and transmission tube with the new parts. Make sure to tighten the screws and reconnect the hoses.
8. Reattach the top and bottom panels and secure them with screws.
9. Plug the machine back in and turn the power back on.
10. Test the machine to ensure the new parts have been installed correctly.
Follow these steps to easily replace the Speed Queen 36425 seal bell and transmission tube. With proper care and maintenance, your machine should stay running in good condition for its lifespan.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
