WPW10299224 Whirlpool Range Door Hinge Active with Spring
This Electric Range Oven Door Hinge allows the door of your oven to close properly and ensures it will safely remain open at an angle during use. Note that two hinges are used per oven; hinges are sold separately. This stainless-steel replacement part can be used for the left or right side. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Oven Door Hinge
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Oven Door Hinge
• Tools Needed: Multi screwdriver
Weight : 0.8303 lbs
Dimension : 10.433 x 4.6062 x 2.4015
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Electric Range Oven Door Hinge allows the door of your oven to close properly and ensures it will safely remain open at an angle during use. Note that two hinges are used per oven; hinges are sold separately. This stainless-steel replacement part can be used for the left or right side. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the oven before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Oven Door Hinge
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Electric Range Oven Door Hinge
• Tools Needed: Multi screwdriver
Weight : 0.8303 lbs
Dimension : 10.433 x 4.6062 x 2.4015
Write Your Own Review
The following parts are replaced by this product
- W10299224
Steps to Replace the WPW10299224 Whirlpool Range Door Hinge - Active with Spring
1. Gather materials:
• WPW10299224 Whirlpool Range Door Hinge - Active with Spring
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
2. Disconnect the power to the oven by unplugging it from the outlet or by shutting off the power at the circuit breaker.
3. Open the door and use the Phillips head screwdriver to unscrew the screws attaching the existing hinge to the range.
4. Use the flat head screwdriver to loosen the existing hinge from the oven door.
5. Place the new WPW10299224 Whirlpool Range Door Hinge - Active with Spring in the same position as the old one and secure it to the oven door using the flat head screwdriver.
6. Secure the new hinge to the oven using the Phillips head screwdriver.
7. Test the oven door to ensure that the door opens and closes easily.
8. Reconnect the power to the oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather materials:
• WPW10299224 Whirlpool Range Door Hinge - Active with Spring
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
2. Disconnect the power to the oven by unplugging it from the outlet or by shutting off the power at the circuit breaker.
3. Open the door and use the Phillips head screwdriver to unscrew the screws attaching the existing hinge to the range.
4. Use the flat head screwdriver to loosen the existing hinge from the oven door.
5. Place the new WPW10299224 Whirlpool Range Door Hinge - Active with Spring in the same position as the old one and secure it to the oven door using the flat head screwdriver.
6. Secure the new hinge to the oven using the Phillips head screwdriver.
7. Test the oven door to ensure that the door opens and closes easily.
8. Reconnect the power to the oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
